Wimonlak Sutapun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wimonlak Sutapun has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Hossein Azarian
Research Centre for Biocomposite Materials for Medical, Agricultural and Food Industry, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
5 shared publications Mohammad Hossein Azarian
Research Center for Biocomposite Materials for Medical, Agricultural and Food Industry, Suranaree University of Technology
2 shared publicationsTiraporn Junyusen
2 shared publications- Tiraporn Junyusen
School of Agricultural Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
2 shared publications - Jatuphorn Wootthikanokkhan
King Mongkut’s University of Technology Thonburi
1 shared publication - Kitti Yuwawech
Materials Technology Program, School of Energy, Environment and Materials, King Mongkut’s University of Technology Thonburi, Bangkok 10140, Thailand
1 shared publication
Latest Publications
- Open Access
Biocompatible, Biodegradable, and Antimicrobial Food Packaging Film from Polylactic Acid and Biogenic Vaterite CaCO3-Ag Hybrid
Developing biocompatible and biodegradable materials for food packaging is crucial for addressing environmental concerns and ensuring food safety. In this study, we present a novel food packaging film composed of poly(lactic acid) (PLA) and biogenic vaterite CaCO3-Ag hybrid microspheres. A non-solution technique was employed to prepare these films, ensuring the sustainability and simplicity of the production process. X-ray diffraction and infrared spectroscopy analyses confirmed the stability and compatibility of the vaterite CaCO3-Ag microspheres within the PLA matrix. Cytotoxicity tests using human dermal fibroblast cells demonstrated complete biocompatibility of the films, even at high concentrations. Antimicrobial efficacy was assessed through minimum inhibitory concentration (MIC) testing, which demonstrated that PLA film containing 7 wt% vaterite CaCO3-Ag hybrids effectively inhibited both gram-positive and gram-negative bacteria at concentrations as low as ≤0.067 g/mL. Mechanical testing showed that the modulus and strength of PLA film increased significantly with the embedding of 5 wt% of vaterite CaCO3-Ag hybrid, reaching a maximum of 5.63 ± 1.51 GPa and 48.07 ± 13.81 MPa, respectively. Thermal analysis indicated improved thermal stability with the addition of the microspheres. Synchrotron X-ray absorption spectroscopy confirmed the stability of the vaterite structure and the presence of both Ag0 and Ag+ species after embedding in PLA matrix. The composite films exhibited improved oxygen and water vapor barrier properties, making them suitable for packaging applications. These findings highlight the potential of PLA-vaterite CaCO3-Ag hybrid films as sustainable and effective food packaging materials.
Open AccessBiocompatible, Biodegradable, and Antimicrobial Food Packaging Film from Polylactic Acid and Biogenic Vaterite CaCO3-Ag Hybrid
Developing biocompatible and biodegradable materials for food packaging is crucial for addressing environmental concerns and ensuring food safety. In this study, we present a novel food packaging film composed of poly(lactic acid) (PLA) and biogenic vaterite CaCO3-Ag hybrid microspheres. A non-solution technique was employed to prepare these films, ensuring the sustainability and simplicity of the production process. X-ray diffraction and infrared spectroscopy analyses confirmed the stability and compatibility of the vaterite CaCO3-Ag microspheres within the PLA matrix. Cytotoxicity tests using human dermal fibroblast cells demonstrated complete biocompatibility of the films, even at high concentrations. Antimicrobial efficacy was assessed through minimum inhibitory concentration (MIC) testing, which demonstrated that PLA film containing 7 wt% vaterite CaCO3-Ag hybrids effectively inhibited both gram-positive and gram-negative bacteria at concentrations as low as ≤0.067 g/mL. Mechanical testing showed that the modulus and strength of PLA film increased significantly with the embedding of 5 wt% of vaterite CaCO3-Ag hybrid, reaching a maximum of 5.63 ± 1.51 GPa and 48.07 ± 13.81 MPa, respectively. Thermal analysis indicated improved thermal stability with the addition of the microspheres. Synchrotron X-ray absorption spectroscopy confirmed the stability of the vaterite structure and the presence of both Ag0 and Ag+ species after embedding in PLA matrix. The composite films exhibited improved oxygen and water vapor barrier properties, making them suitable for packaging applications. These findings highlight the potential of PLA-vaterite CaCO3-Ag hybrid films as sustainable and effective food packaging materials.
- Open Access
- 20 December 2024
- Published by Taylor & Francis in Nanocomposites
- Vol. 11 (1) , 1-19
Vaterite CaCO 3 -Ag hybrid microspheres: an overview of synthesis techniques and applications
- 20 December 2024
- Published by Taylor & Francis in Nanocomposites
- Vol. 11 (1) , 1-19
Open AccessVaterite CaCO 3 -Ag hybrid microspheres: an overview of synthesis techniques and applications
- Open Access
- 2 May 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (21) , 14624-14639
Probing capping mechanisms and polymer matrix loading of biogenic vaterite CaCO 3 –Ag hybrid through X-ray photoelectron spectroscopy (XPS)
XPS revealed Ag + and Ag 0 in biogenic vaterite CaCO 3 –Ag microspheres. CMC and PSS capping agents influenced Ag species distribution. Polymorph transformations and vaterite's stability were highlighted.
- 2 May 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (21) , 14624-14639
Open AccessProbing capping mechanisms and polymer matrix loading of biogenic vaterite CaCO 3 –Ag hybrid through X-ray photoelectron spectroscopy (XPS)
XPS revealed Ag + and Ag 0 in biogenic vaterite CaCO 3 –Ag microspheres. CMC and PSS capping agents influenced Ag species distribution. Polymorph transformations and vaterite's stability were highlighted.
- Open Access
- 19 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 955-969
Biogenic Vaterite Calcium Carbonate-Silver/Poly(Vinyl Alcohol) Film for Wound Dressing
Vaterite, a spherical polymorph of CaCO3, shows potential as a carrier for the stable and controlled release of silver nanoparticles (AgNPs), preventing their aggregation or loss of efficacy during application. Furthermore, the embedding of CaCO3-Ag in a poly(vinyl alcohol) (PVA) matrix helps effectively encapsulate and protect the CaCO3-Ag microspheres and provides mechanical stability for better contact with the wound surface. This article focuses on the fabrication of an antimicrobial and biocompatible absorbent film embedded with precipitated biogenic vaterite CaCO3-Ag microspheres. The impact of vaterite CaCO3-Ag on the physical, chemical, nanomechanical, biocompatibility, and antimicrobial properties of the PVA films was investigated. The morphology study revealed a bilayer film structure with an inactive and active surface containing homogeneously distributed vaterite CaCO3-Ag. The X-ray photoelectron spectroscopy (XPS) analysis of the spin-orbit splitting in the Ag 3d5/2 and Ag 3d3/2 peaks indicated the presence of both metallic and ionic states of silver in vaterite CaCO3-Ag prior to its incorporation into the PVA polymer matrix. However, upon embedding in the PVA matrix, a subsequent transformation to solely ionic states was observed. The nanomechanical properties of PVA improved, and the reduced modulus and hardness increased to 14.62 ± 5.23 and 0.64 ± 0.29 GPa, respectively. The films demonstrate a significant activity toward Gram-negative Escherichia coli bacteria. The release of AgNPs was studied in both open and closed systems at pH 6, mimicking the pH environment of the wound, and it demonstrated a dependency on the type of capping agent used for synthesis and loading of AgNPs. The results further revealed the biocompatibility of the prepared films with human dermal fibroblast cells at a concentration of ≤5 mg/mL, making them applicable and functional for wound dressing applications.
- 19 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 955-969
Open AccessBiogenic Vaterite Calcium Carbonate-Silver/Poly(Vinyl Alcohol) Film for Wound Dressing
Vaterite, a spherical polymorph of CaCO3, shows potential as a carrier for the stable and controlled release of silver nanoparticles (AgNPs), preventing their aggregation or loss of efficacy during application. Furthermore, the embedding of CaCO3-Ag in a poly(vinyl alcohol) (PVA) matrix helps effectively encapsulate and protect the CaCO3-Ag microspheres and provides mechanical stability for better contact with the wound surface. This article focuses on the fabrication of an antimicrobial and biocompatible absorbent film embedded with precipitated biogenic vaterite CaCO3-Ag microspheres. The impact of vaterite CaCO3-Ag on the physical, chemical, nanomechanical, biocompatibility, and antimicrobial properties of the PVA films was investigated. The morphology study revealed a bilayer film structure with an inactive and active surface containing homogeneously distributed vaterite CaCO3-Ag. The X-ray photoelectron spectroscopy (XPS) analysis of the spin-orbit splitting in the Ag 3d5/2 and Ag 3d3/2 peaks indicated the presence of both metallic and ionic states of silver in vaterite CaCO3-Ag prior to its incorporation into the PVA polymer matrix. However, upon embedding in the PVA matrix, a subsequent transformation to solely ionic states was observed. The nanomechanical properties of PVA improved, and the reduced modulus and hardness increased to 14.62 ± 5.23 and 0.64 ± 0.29 GPa, respectively. The films demonstrate a significant activity toward Gram-negative Escherichia coli bacteria. The release of AgNPs was studied in both open and closed systems at pH 6, mimicking the pH environment of the wound, and it demonstrated a dependency on the type of capping agent used for synthesis and loading of AgNPs. The results further revealed the biocompatibility of the prepared films with human dermal fibroblast cells at a concentration of ≤5 mg/mL, making them applicable and functional for wound dressing applications.
- Open Access
- 24 May 2023
- Published by The Royal Society in Royal Society Open Science
- Vol. 10 (5) , 221197
Preparation of hybrid particles of Ag nanoparticles and eggshell calcium carbonate and their antimicrobial efficiency against beef-extracted bacteria
In this study, hybrid particles of AgNPs-loaded eggshell calcium carbonate (AgNPs/eCaCO 3 ) were prepared by co-precipitating the eggshell in the presence of freshly prepared AgNPs with a particle size of 10–30 nm. The hybrid particles were comparatively precipitated at 25°C and 35°C using poly (sodium 4-styrenesulfonate) as a polyelectrolyte. The AgNPs/eCaCO 3 particles prepared at 25°C had a spherical morphology with a mean diameter of 3.56 µm, and Brunauer–Emmett–Teller (BET) surface area of 85.08 m 2 g −1 . On the other hand, the particles prepared at 35°C had a broader size distribution with a mean diameter of 3.19 µm, and a BET surface area of 79.25 m 2 g −1 . AgNPs-loaded commercial calcium carbonate particles (AgNPs/CaCO 3 ) comparatively prepared at 35°C were perfectly spherical with a mean diameter of 5.61 µm. At preparing temperature of 25°C, the hybrid particles contain AgNPs of 0.78 wt% for AgNPs/eCaCO 3 and 3.20 wt% for AgNPs/CaCO 3 . The AgNPs/eCaCO 3 and AgNPs/CaCO 3 particles exhibited the same efficiency against bacteria extracted from beef with an average inhibition zone diameter of 7–10 mm according to the modified Kirby–Bauer disc diffusion assay depending on their concentration and beef source. Freshly prepared silver colloids showed comparatively poorer antimicrobial efficiency.
- 24 May 2023
- Published by The Royal Society in Royal Society Open Science
- Vol. 10 (5) , 221197
Open AccessPreparation of hybrid particles of Ag nanoparticles and eggshell calcium carbonate and their antimicrobial efficiency against beef-extracted bacteria
In this study, hybrid particles of AgNPs-loaded eggshell calcium carbonate (AgNPs/eCaCO 3 ) were prepared by co-precipitating the eggshell in the presence of freshly prepared AgNPs with a particle size of 10–30 nm. The hybrid particles were comparatively precipitated at 25°C and 35°C using poly (sodium 4-styrenesulfonate) as a polyelectrolyte. The AgNPs/eCaCO 3 particles prepared at 25°C had a spherical morphology with a mean diameter of 3.56 µm, and Brunauer–Emmett–Teller (BET) surface area of 85.08 m 2 g −1 . On the other hand, the particles prepared at 35°C had a broader size distribution with a mean diameter of 3.19 µm, and a BET surface area of 79.25 m 2 g −1 . AgNPs-loaded commercial calcium carbonate particles (AgNPs/CaCO 3 ) comparatively prepared at 35°C were perfectly spherical with a mean diameter of 5.61 µm. At preparing temperature of 25°C, the hybrid particles contain AgNPs of 0.78 wt% for AgNPs/eCaCO 3 and 3.20 wt% for AgNPs/CaCO 3 . The AgNPs/eCaCO 3 and AgNPs/CaCO 3 particles exhibited the same efficiency against bacteria extracted from beef with an average inhibition zone diameter of 7–10 mm according to the modified Kirby–Bauer disc diffusion assay depending on their concentration and beef source. Freshly prepared silver colloids showed comparatively poorer antimicrobial efficiency.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2884 (1)
Electrospun PLA fibers with silver loaded calcium carbonate filler as the antimicrobial material: Effect of solvent systems and mechanical properties
Silver nanoparticles (AgNPs) are widely used as antimicrobial agent in food packaging applications, wound dressing materials and other antimicrobial applications because of their outstanding antimicrobial activity. AgNPs deposited onto calcium carbonate (CaCO3) particles, have also the antimicrobial activity of which calcium carbonate functions as the agent carrier. Silver nanoparticles loaded calcium carbonate particles (Ag/CaCO3) were prepared by in situ precipitation method as mentioned by S. Zapotoczny (2012). In this study, antimicrobial composite material from the silver loaded calcium carbonate and poly (L-lactic acid) (PLA) is prepared with electrospinning technique. The Hildebrand solubility parameter of PLA is around 10.1 cal1/2 cm −3/2 (20 to 21 MPa½). PLA solution is prepared using binary solvent systems with the solubility parameters close to that of PLA, binary solvent system of chloroform (CHL): dimethylformamide (DMF) and dichloromethane (DCM): dimethylformamide (DMF) with the mixing ration of 9:1 by volume. Then, the PLA solutions and the filler were mixed in order to prepare electrospun nanofiber mat. The condition for fabricating electrospun PLA and Ag/CaCO3-PLA is a 15 cm of collection distance and 15 kV of applied voltage. The effect of binary solvent system on fibers morphology and diameter will be studied using the Field Emission Scanning Electron Microscope (FE-SEM). In addition, tensile properties of the mat will be determined using Universal Testing Machine (UTM). Incorporation of 5% Ag/eCaCO3 filler and use of solvent system of DCM:DMF gave rise to filled PLA electrospun fibers with larger diameter fiber with bead on the string along the fiber. For tensile properties, PLA electrospun fibers with 5% Ag/eCaCO3 from solvent system of DCM:DMF have higher Young’s modulus and tensile strength than the one prepared from solvent system of CHL:DMF.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2884 (1)
Open AccessElectrospun PLA fibers with silver loaded calcium carbonate filler as the antimicrobial material: Effect of solvent systems and mechanical properties
Silver nanoparticles (AgNPs) are widely used as antimicrobial agent in food packaging applications, wound dressing materials and other antimicrobial applications because of their outstanding antimicrobial activity. AgNPs deposited onto calcium carbonate (CaCO3) particles, have also the antimicrobial activity of which calcium carbonate functions as the agent carrier. Silver nanoparticles loaded calcium carbonate particles (Ag/CaCO3) were prepared by in situ precipitation method as mentioned by S. Zapotoczny (2012). In this study, antimicrobial composite material from the silver loaded calcium carbonate and poly (L-lactic acid) (PLA) is prepared with electrospinning technique. The Hildebrand solubility parameter of PLA is around 10.1 cal1/2 cm −3/2 (20 to 21 MPa½). PLA solution is prepared using binary solvent systems with the solubility parameters close to that of PLA, binary solvent system of chloroform (CHL): dimethylformamide (DMF) and dichloromethane (DCM): dimethylformamide (DMF) with the mixing ration of 9:1 by volume. Then, the PLA solutions and the filler were mixed in order to prepare electrospun nanofiber mat. The condition for fabricating electrospun PLA and Ag/CaCO3-PLA is a 15 cm of collection distance and 15 kV of applied voltage. The effect of binary solvent system on fibers morphology and diameter will be studied using the Field Emission Scanning Electron Microscope (FE-SEM). In addition, tensile properties of the mat will be determined using Universal Testing Machine (UTM). Incorporation of 5% Ag/eCaCO3 filler and use of solvent system of DCM:DMF gave rise to filled PLA electrospun fibers with larger diameter fiber with bead on the string along the fiber. For tensile properties, PLA electrospun fibers with 5% Ag/eCaCO3 from solvent system of DCM:DMF have higher Young’s modulus and tensile strength than the one prepared from solvent system of CHL:DMF.
- Open Access
- 17 November 2022
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 9
Biogenic calcium carbonate derived from waste shells for advanced material applications: A review
Biogenic calcium carbonate derived from waste shells has received significant attention in the last 2 decades as a replacement for limestone due to its contribution to reducing environmental impact by turning wastes into value-added biomaterial and moving global society toward net-zero waste. Recently, several review papers have been published regarding applying biogenic derived calcium carbonate in engineering, biomedical, electrochemical, and environmental technologies. This review stands apart from other reviews on this topic in terms of focusing and reviewing the published papers used and reported indirect methods only to obtain calcium carbonate from biogenic waste shells and not by direct methods. The direct or untreated methods include simple grinding, ball milling, or mortar and pestle techniques. In contrast, the indirect methods covered in this review paper consist of precipitation and different chemical treatment techniques. Therefore, this review paper aims to comprehensively summarize the usage of calcium carbonate derived from eggshells and seashells by indirect methods and glance at its recent development for advanced material applications including water treatment, bio-filler, and reinforcement in polymer composites, energy application, pharmaceutical, biomedical, and drug delivery applications.
- 17 November 2022
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 9
Open AccessBiogenic calcium carbonate derived from waste shells for advanced material applications: A review
Biogenic calcium carbonate derived from waste shells has received significant attention in the last 2 decades as a replacement for limestone due to its contribution to reducing environmental impact by turning wastes into value-added biomaterial and moving global society toward net-zero waste. Recently, several review papers have been published regarding applying biogenic derived calcium carbonate in engineering, biomedical, electrochemical, and environmental technologies. This review stands apart from other reviews on this topic in terms of focusing and reviewing the published papers used and reported indirect methods only to obtain calcium carbonate from biogenic waste shells and not by direct methods. The direct or untreated methods include simple grinding, ball milling, or mortar and pestle techniques. In contrast, the indirect methods covered in this review paper consist of precipitation and different chemical treatment techniques. Therefore, this review paper aims to comprehensively summarize the usage of calcium carbonate derived from eggshells and seashells by indirect methods and glance at its recent development for advanced material applications including water treatment, bio-filler, and reinforcement in polymer composites, energy application, pharmaceutical, biomedical, and drug delivery applications.
- Open Access
- 12 May 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (23) , 14729-14739
Tuning polymorphs of precipitated calcium carbonate from discarded eggshells: effects of polyelectrolyte and salt concentration
Tuned spherical vaterite calcium carbonate polymorphs have been precipitated from discarded eggshells and loaded with silver nanoparticles by in situ synthesis.
- 12 May 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (23) , 14729-14739
Open AccessTuning polymorphs of precipitated calcium carbonate from discarded eggshells: effects of polyelectrolyte and salt concentration
Tuned spherical vaterite calcium carbonate polymorphs have been precipitated from discarded eggshells and loaded with silver nanoparticles by in situ synthesis.
- 27 March 2013
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (10) , 1025-1033
Application of Calcined Eggshell Powder as Functional Filler for High Density Polyethylene
Calcined eggshell powder, prepared from waste eggshell, was melted mixed with HDPE at contents of 10–40 wt%. It was shown that calcined eggshell powder was a good functional filler for HDPE. Young's modulus and ultimate stress of the filled HDPE increased with increasing the filler content. In addition, thermal decomposition temperature and yield strength of the filled HDPE were not significantly influenced by the addition of the filler. Compatibilizing the filled HDPE with 2 wt% maleic anhydride grafted HDPE improved impact strength of the filled HDPE according to homogeneous distribution of the filler.
- 27 March 2013
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 52 (10) , 1025-1033
Application of Calcined Eggshell Powder as Functional Filler for High Density Polyethylene
Calcined eggshell powder, prepared from waste eggshell, was melted mixed with HDPE at contents of 10–40 wt%. It was shown that calcined eggshell powder was a good functional filler for HDPE. Young's modulus and ultimate stress of the filled HDPE increased with increasing the filler content. In addition, thermal decomposition temperature and yield strength of the filled HDPE were not significantly influenced by the addition of the filler. Compatibilizing the filled HDPE with 2 wt% maleic anhydride grafted HDPE improved impact strength of the filled HDPE according to homogeneous distribution of the filler.