Comparative investigation of physical, mechanical and thermomechanical characterization of dental composite filled with nanohydroxyapatite and mineral trioxide aggregate
Open Access
- 1 February 2017
- journal article
- research article
- Published by Walter de Gruyter GmbH in e-Polymers
- Vol. 17 (4) , 311-319
Abstract
This study presents comparative investigation of adding nanohydroxyapatite (HA) (5–20 wt.%) and mineral trioxide aggregate (MTA) (5–20 wt.%) on the physical, mechanical and thermomechanical characterization of dental composite. The performances of both experimental composites were assessed through various physical, mechanical and thermomechanical tests such as void content test, microhardness test, compressive strength test, dynamic mechanical analysis and thermogravimetric analysis. The result of experiment indicated that the addition of 5 wt.% of HA increased the water sorption, hardness and compressive strength by 50.47%, 13.46% and 62.35%, respectively, whereas the addition of 5 wt.% of MTA increased the water sorption, hardness and compressive strength by 19.23%, 100% and 5.44%, respectively. Dynamic mechanical analysis results revealed that the addition of 5 wt.% HA increased the storage modulus by 10.21%, whereas the addition of 5 wt.% of MTA decreased the storage modulus by 11.79%. The filler HA proved to be better choice in term of thermal stability behavior as compare to MTA filler.Keywords
This publication has 42 references indexed in Scilit:
- Epoxy Composite Reinforced with Nano and Micro SiC Particles: Curing Kinetics and Mechanical PropertiesThe Journal of Adhesion, 2012
- Novel dental composites reinforced with zirconia–silica ceramic nanofibersDental Materials, 2012
- Mechanical parameters of strontium doped hydroxyapatite sintered using microwave and conventional methodsJournal of the Mechanical Behavior of Biomedical Materials, 2011
- BisGMA/TEGDMA ratio and filler content effects on shrinkage stressDental Materials, 2011
- Resin composite—State of the artDental Materials, 2011
- Effect of Boron Carbide Filler on the Curing and Mechanical Properties of an Epoxy ResinThe Journal of Adhesion, 2009
- Mechanical behaviour of porous hydroxyapatiteActa Biomaterialia, 2008
- An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) investigation of the long-term effect on the solidification/stabilization (S/S) of arsenic(V) in Portland cement type-VScience of The Total Environment, 2004
- Alternative Interpretations of Water Sorption Values of Composite ResinsJournal of Dental Research, 1985
- Materials ScienceJournal of Dental Research, 1983