Noncontact Current Measurement Based on 3-D TMR Sensor Array
- 1 July 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (17) , 33519-33527
Abstract
This paper proposed a non-contact current measurement system for in-wall concealed conductors using a three-dimensional (3-D) tunnel magnetoresistive (TMR) sensor array. The system employs a linear strip array of three coaxial, collinear TMR sensors (S1, S2, S3) with an optimal spacing of 15 mm, designed to detect magnetic fields in three spatial dimensions without physical contact or wall damage. To address positional deviations, including horizontal displacement (eccentricity up to 3 mm) and angular tilt (up to 30 degrees), a geometric correction algorithm is developed based on Biot-Savart law and sensor output ratios; this algorithm calculates the conductor’s intersection point and direction vector to correct for errors. For crosstalk from adjacent wires, a dual-conductor optimization model is introduced, leveraging the Levenberg-Marquardt method to solve nonlinear equations and minimize interference effects in scenarios with parallel conductors (e.g., spacing from 10–50 mm). Implemented with the AK09940A sensor (10 nT/LSB resolution, ±1200 μT range, and 40–70 nT RMS noise in low-noise mode), the system achieves a signal-to-noise ratio (SNR) of 50.7–66.9 dB through hardware calibration and averaging of 100 samples. Experimental validation under complex conditions—including horizontal displacement, tilt, and interfering conductors—demonstrates a relative error of less than 2% for currents of 15–40 A at burial depths of 20–40 mm, confirming high accuracy and robustness for building electrical safety applications.Keywords
Funding Information
- National Natural Science Foundation of China (62073167)
- Science Research Funding of Hainan University (XJ2300009837)
- Shanghai Pudong New Area Science and Technology Development Fund Industry-Academia-Research Collaboration Special Funding (PKX2024-D06)
This publication has 15 references indexed in Scilit:
- Research on Synchronous Measurement Methods Based on Non-Contact Sensing2024
- Simulation analysis of MEMS current sensor based on magneto-electric effect2023
- Optical Magnetostrictive Current Sensor Based on In-Fiber Fabry–Pérot CavityIEEE Sensors Journal, 2022
- Advanced metal detection system based on TMR sensor arrayJournal of Magnetism and Magnetic Materials, 2022
- Research on suppression of external magnetic field interference of tunnel magnetoresistive sensor based on versoria variable step improved adaptive filtering methodEnergy Reports, 2021
- Crosstalk analysis and Current Measurement Correction in Circular 3D Magnetic Sensors ArraysIEEE Sensors Journal, 2020
- Experimenting Non-Contact Power Measurement for 3-Phase Residential Applications2019
- A Novel Adaptive Filter for Accurate Measurement of Current with Magnetic Sensor Array2018
- A Fault Diagnosis Method for On Load Tap Changer of Aerospace Power Grid Based on the Current DetectionIEEE Access, 2018
- AMR Yokeless Current Sensor with Improved AccuracyProcedia Engineering, 2016