On the Torsional Behavior of the Longitudinal Bridge Girders Used in the LT-Bridge Construction Method
Open Access
- 30 May 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (11) , 6657
Abstract
A new bridge construction method, combining semi-precast elements and in situ concrete, has been developed at TU Wien, with the aim of decreasing erection time. In the course of construction using this new method, structural conditions arise that render a more detailed investigation necessary. By connecting a precast, thin-walled box girder to a bridge segment located on a pier by means of post-tensioning, a joint is created. By casting in situ concrete on the bottom and top slabs, the joint can be bridged with longitudinal reinforcement; however, the unreinforced vertical joints in the webs remain. This detail is a specific characteristic of the LT-bridge construction method and needs to be further investigated and assessed, as the question arises as to how this circumstance affects the torsional bearing behavior of the bridge superstructure. Torsion tests described in the literature consider ordinary box girders with longitudinal reinforcement or post-tensioned segmental bridges without longitudinal reinforcement at the joints. Therefore, the new reinforcement layout at the joints had to be investigated experimentally. Two large-scale thin-walled box girders—one without joints in the webs and the other with unreinforced joints in the webs—were tested, allowing for a direct comparison of conventionally manufactured bridges and those erected with the new bridge construction method. Furthermore, we investigated whether the results of common calculation methods corresponded to the experimental findings.Keywords
Funding Information
- Österreichische Forschungsförderungsgesellschaft (880272)
- TU Wien (880272)
This publication has 16 references indexed in Scilit:
- Entwicklung und erste Anwendung des BrückenklappverfahrensBeton- und Stahlbetonbau, 2020
- Modeling for Assessment of Long-Term Behavior of Prestressed Concrete Box-Girder BridgesJournal of Bridge Engineering, 2018
- New Torsion Experiment on Large-Sized Hollow Reinforced Concrete BeamsACI Structural Journal, 2014
- Building bridges using the balanced lift methodStructural Concrete, 2014
- Torsion in High-Strength Concrete Hollow Beams: Strength and Ductility AnalysisACI Structural Journal, 2009
- Shear and Torsion Design of Prestressed and Non-Prestressed Concrete BeamsPCI Journal, 1980
- Torsionsversuche an Stahl- und Spannbetonbalken1971
- Bruchwiderstand von Stahlbetonbalken unter Torsion und Biegung1970
- Torsions-Biege-Versuche an Stahlbetonbalken1969
- Torsionsversuche an Stahlbetonbalken1968