Effect of Titanium Carbide in a Flux Cored Wire Charge on the Structure of a Deposited Metal
Authors:
- 1 June 2025
- journal article
- research article
- Published by Pleiades Publishing Ltd in Russian Metallurgy (Metally)
- Vol. 2025 (6) , 1471-1477
Abstract
Changes in the microstructure and hardness of the metal deposited with flux-cored wires 2.0 and 1.6 mm in diameter, which are characterized by different contents (from 9.8 to 29 wt %) and types of titanium carbide, are studied during their deposition with a nonconsumable electrode. The structure of the deposited metal is shown to contain both retained coarse titanium carbide and fine titanium carbide particles no more than 10 μm in size. The effect of nickel added to the composition of flux cored wire charge, both in the form of pure nickel and as part of TiC + Ni composite granules prepared by combined processing of nickel and titanium carbide powders in a planetary mill, on changes in the structure formation and the hardness of the deposited metal is studied. The use of nickel in the flux cored filler wire is shown to decrease the amount of introduced titanium carbide and to increase the hardness.Keywords
This publication has 4 references indexed in Scilit:
- Formation of a Composite Structure in a Deposited Fe–Cr–C + TiC (NbC) MetalRussian Metallurgy (Metally), 2023
- Influence of chromium carbide introduced into the flux-cored wire charge on wear resistance of surfaced metal2022
- Formation of composite structure of Fe—Cr—C + TiC system during arc surfacing using filler flux-cored wireBlanking productions in mechanical engineering (press forging, foundry and other productions), 2022
- Special features of coldwire gas metal arc surfacingBlanking productions in mechanical engineering (press forging, foundry and other productions), 2022