The Effect of Cellulose Nanofibres on Dewatering during Wet-Forming and the Mechanical Properties of Thermoformed Specimens Made of Thermomechanical and Kraft Pulps
Open Access
- 7 September 2023
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 13 (18) , 2511
Abstract
Due to environmental concerns regarding single-use plastic materials, major efforts are being made to develop new material concepts based on biodegradable and renewable resources, e.g., wood pulp. In this study, we assessed two types of wood pulp fibres, i.e., thermomechanical pulp (TMP) and Kraft pulp fibres, and tested the performance of the fibres in wet-moulding and thermopressing trials. Kraft pulp fibres appeared to retain more water than TMP, increasing the dewatering time during wet-moulding and apparently increasing the compression resistance of the pulp during thermoforming. Additionally, cellulose nanofibres (CNF) were added to the pulps, which improved the mechanical properties of the final thermopressed specimens. However, the addition of CNF to the pulps (from 2 to 6%) had a further decrease in the dewatering efficiency in the wet-moulding process, and this effect was more pronounced in the Kraft pulp specimens. The mechanical performance of the thermoformed specimens was in the same range as the plastic materials that are conventionally used in food packaging, i.e., modulus 0.6–1.2 GPa, strength 49 MPa and elongation 6–9%. Finally, this study demonstrates the potential of wood pulps to form three-dimensional thermoformed products.Keywords
Funding Information
- The Research Council of Norway
This publication has 24 references indexed in Scilit:
- Environmental aspects of Norwegian production of pulp fibres and printing paperJournal of Cleaner Production, 2013
- Printing ink compounds in foods: UK survey resultsFood Additives & Contaminants: Part B, 2013
- The Elongation Potential of Paper – How Should Fibres be Deformed to Make Paper Extensible?BioResources, 2012
- The effect of MFC on the pressability and paper properties of TMP and GCC based sheetsNordic Pulp & Paper Research Journal, 2012
- Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strengthCellulose, 2010
- Production of microfibrillated cellulose (MFC)-reinforced polylactic acid (PLA) nanocomposites from sheets obtained by a papermaking-like processComposites Science and Technology, 2009
- Strength and barrier properties of MFC filmsCellulose, 2008
- The use of microfibrillated cellulose produced from kraft pulp as strength enhancer in TMP paperNordic Pulp & Paper Research Journal, 2008
- Morphological characteristics of TMP fibres as affected by the rotational speed of the refinerNordic Pulp & Paper Research Journal, 1999
- Fibre characteristics of some mechanical pulp gradesNordic Pulp & Paper Research Journal, 1998