Effect of V Addition on Microstructure and Mechanical Properties in C–Mn–Si Steels after Quenching and Partitioning Processes
Open Access
Abstract
Three C-Si-Mn Q&P steels with different V addition after one-step and two-step quenching and partitioning (Q&P) processes were investigated by means of optical microstructure observation, X-ray diffraction (XRD) measurement, transmission electron microscopy (TEM) characterization and particle size distribution (PSD) analysis. The effect of V addition on strength and ductility of the steels was elucidated by comparative analysis on the microstructure and mechanical properties as functions of partitioning time and temperature. For one-step Q&P treatment, the mechanical properties were mainly controlled by the tempering behavior of martensite during partitioning. V addition was helpful to mitigate the deterioration of mechanical properties by precipitation strengthening and grain refinement strengthening. For two-step Q&P treatment, the satisfying plasticity was attributed to the transformation-induced plasticity (TRIP) effect of retained austenite maintaining the high work hardening rate at high strain regime. The higher volume fraction of retained austenite with high stability resulted from the refined microstructure and the promoted carbon partitioning for the steel with 0.16 wt% V addition. However, the carbon consumption due to the formation of VC carbides led to the strength reduction of tempered martensite.Keywords
This publication has 29 references indexed in Scilit:
- Relationship between microstructure and mechanical properties in Nb–V microalloyed TRIP steelMaterials Science and Technology, 2015
- Influence of alloying elements on the microstructure evolution and mechanical properties in quenched and partitioned steelsMaterials Science and Engineering: A, 2014
- Microstructure–properties relationship in a one-step quenched and partitioned steelMaterials Science and Engineering: A, 2014
- A novel design: Partitioning achieved by quenching and tempering (Q–T & P) in an aluminium-added low-density steelScripta Materialia, 2013
- Vanadium Precipitation During Intercritical Annealing in Cold Rolled TRIP SteelsISIJ International, 2007
- Strain-induced transformation of retained austenite in low-carbon low-silicon TRIP steel containing aluminum and vanadiumMaterials Science and Engineering: A, 2006
- Effects of Hot Deformation and Subsequent Austempering on the Mechanical Properties of Si-Mn TRIP SteelsISIJ International, 2006
- Carbon partitioning into austenite after martensite transformationActa Materialia, 2003
- Precipitation hardening in metalsMaterials Science and Technology, 1999
- Deformation, fracture, and mechanical properties of low-temperature-tempered martensite in SAE 43xx steelsMetallurgical and Materials Transactions A, 1997