Non-destructive testing investigation of gaps in thin Glare laminates
- 29 October 2019
- journal article
- research article
- Published by Taylor & Francis in Nondestructive Testing and Evaluation
- Vol. 36 (1) , 17-34
Abstract
The manufacturing of Fibre Metal Laminates, consisting of alternating layers of pre-preg fibre and metal is complex, and defects can be introduced during manufacturing. The automation of the manufacturing steps is vital for future Glare production, and specific defects have to be considered. Among them, gaps between pre-preg plies represent a potential risk for the mechanical performances of the laminate. In this paper/research, non-destructive testing based on ultrasonic inspections are performed on Glare with pre-preg gaps in order to extend and improve the current state of the art to different pre-preg gap widths, depths, and lay-ups. Firstly, gaps were introduced in Glare specimens. Then, a conventional C-scan ultrasonic inspection is performed. In order to overcome the current limitations of a top or planar view of the laminates, the evaluation of the depth of the gaps in the laminates is performed by means of phased array ultrasonic testing. Finally, images of the laminate cross-section have been collected in order to provide a meaningful evidence of the ultrasonic-based analysis. Results from different Glare and gap widths and depths show the accuracy of the proposed investigation which is able to provide a detailed assessment of the gap occurrences also for very thin laminates.Keywords
Funding Information
- Lublin University of Technology-Regional Excellence Initiative, funded by the Polish Ministry of Science and Higher Education (030/RID/2018/19)
This publication has 28 references indexed in Scilit:
- Variable-stiffness composite panels: Defect tolerance under in-plane tensile loadingComposites Part A: Applied Science and Manufacturing, 2014
- Experimental study of the effect of automated fiber placement induced defects on performance of composite laminatesComposites Part A: Applied Science and Manufacturing, 2011
- Ultrasonic arrays for non-destructive evaluation: A reviewNDT & E International, 2006
- Fatigue and damage tolerance issues of Glare in aircraft structuresInternational Journal of Fatigue, 2006
- Variation in the group velocity of Lamb waves as a tool for the detection of delamination in GLARE aluminium plate-like structuresComposite Structures, 2004
- Nondestructive evaluation methods for damage assessment in fiber‐metal laminatesPolymer Composites, 2000
- Fibre-metal laminatesRecent developments and applicationsInternational Journal of Fatigue, 1994
- Laps and gaps in thermoplastic composites processingComposites Manufacturing, 1991
- Ultrasonic detection of kissing bonds at adhesive interfacesJournal of Adhesion Science and Technology, 1991
- Measurement of small angle fiber misalignments in continuous fiber compositesComposites Science and Technology, 1987