Davide Nardi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Davide Nardi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Jos Sinke
Department of Aerospace Structures and Materials, Faculty of Aerospace Engineering, Delft University of Technology, Delft, The Netherlands
2 shared publicationsLuca Lampani
2 shared publications- Michele Pasquali
Department of Mechanical and Aerospace Engineering (DIMA), Sapienza University of Rome, 00184 Rome, Italy
2 shared publications Paolo Gaudenzi
2 shared publicationsFabrizio Sarasini
1 shared publicationIlaria Chiappetta
1 shared publication
Latest Publications
- Open Access
- 1 June 2021
- Published by Springer Nature in Research Square
Machine Learning for Warpage Prediction of Fused Deposition Modelling Processed Parts
This paper provides a methodology for the application of a machine learning-based framework for fused deposition modelling manufacturing. The approach was developed to take into account the influence of the material, the part geometry, the process parameters on the maximum part warpage defined by the user. The results showed the effectiveness of machine learning for both classification and regression purposes so that the printability of the part is firstly provided, based on the selected warpage threshold, and secondly, the part warpage can be predicted within the problem design space variables, i.e. part material, part height, part length, and layer thickness. The limitations of the use of the analytic equation as a data-points generator are widely discussed, along with the future research based on the obtained preliminary results. In conclusion, the described methodology represents a concrete step towards a first-time-right strategy in the field of manufacturing processes.
- 1 June 2021
- Published by Springer Nature in Research Square
Open AccessMachine Learning for Warpage Prediction of Fused Deposition Modelling Processed Parts
This paper provides a methodology for the application of a machine learning-based framework for fused deposition modelling manufacturing. The approach was developed to take into account the influence of the material, the part geometry, the process parameters on the maximum part warpage defined by the user. The results showed the effectiveness of machine learning for both classification and regression purposes so that the printability of the part is firstly provided, based on the selected warpage threshold, and secondly, the part warpage can be predicted within the problem design space variables, i.e. part material, part height, part length, and layer thickness. The limitations of the use of the analytic equation as a data-points generator are widely discussed, along with the future research based on the obtained preliminary results. In conclusion, the described methodology represents a concrete step towards a first-time-right strategy in the field of manufacturing processes.
- 29 October 2019
- Published by Taylor & Francis in Nondestructive Testing and Evaluation
- Vol. 36 (1) , 17-34
Non-destructive testing investigation of gaps in thin Glare laminates
The manufacturing of Fibre Metal Laminates, consisting of alternating layers of pre-preg fibre and metal is complex, and defects can be introduced during manufacturing. The automation of the manufacturing steps is vital for future Glare production, and specific defects have to be considered. Among them, gaps between pre-preg plies represent a potential risk for the mechanical performances of the laminate. In this paper/research, non-destructive testing based on ultrasonic inspections are performed on Glare with pre-preg gaps in order to extend and improve the current state of the art to different pre-preg gap widths, depths, and lay-ups. Firstly, gaps were introduced in Glare specimens. Then, a conventional C-scan ultrasonic inspection is performed. In order to overcome the current limitations of a top or planar view of the laminates, the evaluation of the depth of the gaps in the laminates is performed by means of phased array ultrasonic testing. Finally, images of the laminate cross-section have been collected in order to provide a meaningful evidence of the ultrasonic-based analysis. Results from different Glare and gap widths and depths show the accuracy of the proposed investigation which is able to provide a detailed assessment of the gap occurrences also for very thin laminates.
- 29 October 2019
- Published by Taylor & Francis in Nondestructive Testing and Evaluation
- Vol. 36 (1) , 17-34
Non-destructive testing investigation of gaps in thin Glare laminates
The manufacturing of Fibre Metal Laminates, consisting of alternating layers of pre-preg fibre and metal is complex, and defects can be introduced during manufacturing. The automation of the manufacturing steps is vital for future Glare production, and specific defects have to be considered. Among them, gaps between pre-preg plies represent a potential risk for the mechanical performances of the laminate. In this paper/research, non-destructive testing based on ultrasonic inspections are performed on Glare with pre-preg gaps in order to extend and improve the current state of the art to different pre-preg gap widths, depths, and lay-ups. Firstly, gaps were introduced in Glare specimens. Then, a conventional C-scan ultrasonic inspection is performed. In order to overcome the current limitations of a top or planar view of the laminates, the evaluation of the depth of the gaps in the laminates is performed by means of phased array ultrasonic testing. Finally, images of the laminate cross-section have been collected in order to provide a meaningful evidence of the ultrasonic-based analysis. Results from different Glare and gap widths and depths show the accuracy of the proposed investigation which is able to provide a detailed assessment of the gap occurrences also for very thin laminates.
- Open Access
- 13 March 2018
- Published by Springer Nature in Applied Composite Materials
- Vol. 25 (6) , 1491-1507
Detection and Evaluation of Pre-Preg Gaps and Overlaps in Glare Laminates
- 13 March 2018
- Published by Springer Nature in Applied Composite Materials
- Vol. 25 (6) , 1491-1507
Open AccessDetection and Evaluation of Pre-Preg Gaps and Overlaps in Glare Laminates
- 1 September 2016
- Published by Elsevier in Composite Structures
- Vol. 151, 108-113
Detection of low-velocity impact-induced delaminations in composite laminates using Auto-Regressive models
- 1 September 2016
- Published by Elsevier in Composite Structures
- Vol. 151, 108-113
Detection of low-velocity impact-induced delaminations in composite laminates using Auto-Regressive models
- 1 December 2015
- Published by Elsevier in Composite Structures
- Vol. 133, 1209-1219
Sparse sensing detection of impact-induced delaminations in composite laminates
- 1 December 2015
- Published by Elsevier in Composite Structures
- Vol. 133, 1209-1219
Sparse sensing detection of impact-induced delaminations in composite laminates