Mechanical Performance Tests of Customized CORC Cable
- 29 July 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (8) , 1-4
Abstract
High temperature superconducting (HTS) CORC cable, wound from ReBCO coated superconducting tapes, have good mechanical performance, flexibility, high current carrying capacity and isotropy. Therefore, CORC cables have important potential in magnets and power applications. In application, the cable will inevitably be subjected to mechanical and electromagnetic stresses. And during the operation cables will probably experience electromagnetic and thermal cycles. To investigate these effects on the performance of CORC cables, the changes in critical current under different bending radii, transverse pressure, and electromagnetic and thermal cycling were tested in liquid nitrogen. The results show that the soft-core sample degraded when the pressure achieved 1.2 kN/m, while the hard-core cable shows a reduction in critical current at a pressure of 7.7 kN/m. The bending measurement on the CORC cable with hard core shows that the critical current degradation occurs when the bending radius is below 45 mm. There is a decrease in critical current in a 3-turn coil wound with a 1.2-meter-long CORC cable, which may be due to mechanical damage incurred during the winding process. The electromagnetic and thermal cycle experiments on the CORC cable made coil caused reversible and irreversible critical current degradation. After a series of cycles, the Ic tended to be stabilized at 90% of original critical current of the CORC cable.Keywords
Funding Information
- National Natural Science Foundation of China (52107032)
- Strategic Priority Research Program of the Chinese Academy of Sciences (XDB25020200)
This publication has 9 references indexed in Scilit:
- A 1.2 T canted cos θ dipole magnet using high-temperature superconducting CORC ® wiresSuperconductor Science and Technology, 2019
- Effect of transverse compressive monotonic and cyclic loading on the performance of superconducting CORC ® cables and wiresSuperconductor Science and Technology, 2018
- Design and Preparation of Two ReBCO-CORC®Cable-In-Conduit Conductors for Fusion and Detector MagnetsIOP Conference Series: Materials Science and Engineering, 2017
- Introduction of CORC ® wires: highly flexible, round high-temperature superconducting wires for magnet and power transmission applicationsSuperconductor Science and Technology, 2016
- Design and Manufacturing of a 45 kA at 10 T REBCO-CORC Cable-in-Conduit Conductor for Large-Scale MagnetsIEEE Transactions on Applied Superconductivity, 2016
- Characterization of a high-temperature superconducting conductor on round core cables in magnetic fields up to 20 TSuperconductor Science and Technology, 2013
- Compact GdBa2Cu3O7–δcoated conductor cables for electric power transmission and magnet applicationsSuperconductor Science and Technology, 2011
- Experimentally determined transport and magnetization ac losses of small cable models constructed from YBCO coated conductorsSuperconductor Science and Technology, 2010
- YBa2Cu3O7−δcoated conductor cabling for low ac-loss and high-field magnet applicationsSuperconductor Science and Technology, 2009