Rheological and Microstructural Characterization of Steel Slag Powder-Modified Asphalt Mastics: Insights into High-Temperature Performance Enhancement
Open Access
Abstract
This study systematically investigates the rheological modification mechanism of steel slag powder (SSP) as an alternative filler in asphalt mastics, with comparative analysis against conventional limestone powder (LP). Four filler-to-asphalt (F/A) ratios (0.6–1.2) were employed to prepare modified mastics. Comprehensive characterization through laser diffraction analysis, BET nitrogen adsorption, and scanning electron microscopy (SEM) revealed SSP’s significant microstructural advantages: a 29.2% smaller median particle size (D50) and 7.06% larger specific surface area compared to LP, accompanied by enhanced interparticle connectivity and morphological complexity. Rheological evaluation via dynamic shear rheology (DSR) demonstrated SSP’s superior performance enhancement—particularly at elevated F/A ratios (1.0–1.2), where multiple stress creep recovery (MSCR) tests showed a 6.9–46.06% improvement in non-recoverable creep compliance (Jnr) over LP-modified counterparts. The temperature sweep analysis indicated SSP’s effectiveness in reducing the temperature susceptibility index by 9.37–18.06% relative to LP. Fourier-transform infrared spectroscopy (FTIR) combined with two-dimensional correlation analysis (2D-COS) confirmed the dominance of physical interactions over chemical bonding in the SSP–asphalt interface. The results establish SSP’s dual functionality as both a rheological modifier and sustainable construction material, providing mechanistic insights for optimizing steel slag utilization in pavement engineering.Keywords
Funding Information
- Natural Science Foundation of China (52268068, 2022TSYCLJ0045, 2020D01A92, 2023D01B26, 2024-ZD-016)
- Tianshan’s leading talents in scientific and technological innovation (52268068, 2022TSYCLJ0045, 2020D01A92, 2023D01B26, 2024-ZD-016)
- Natural Science Foundation of Xinjiang’s Uygur Autonomous Region, China (52268068, 2022TSYCLJ0045, 2020D01A92, 2023D01B26, 2024-ZD-016)
- Key Science and Technology Project of Xinjiang’s Uygur Autonomous Region Transportation Department (52268068, 2022TSYCLJ0045, 2020D01A92, 2023D01B26, 2024-ZD-016)
This publication has 33 references indexed in Scilit:
- Influence of environmental conditions on concrete manufactured with recycled and steel slag aggregates at early ages and long termConstruction and Building Materials, 2020
- Gainful utilization of dimensional limestone waste as fine aggregate in cement mortar mixesConstruction and Building Materials, 2019
- Characteristics of steel slag filler and its influence on rheological properties of asphalt mortarConstruction and Building Materials, 2019
- Investigating the effects of steel slag powder on the properties of self-compacting concrete with recycled aggregatesConstruction and Building Materials, 2019
- Evaluation of fracture resistance of asphalt mixes involving steel slag and RAP: Susceptibility to aging level and freeze and thaw cyclesConstruction and Building Materials, 2017
- Recycling of RAP and steel slag aggregates into the warm mix asphalt: A performance evaluationConstruction and Building Materials, 2017
- Effects of steel slag fillers on the rheological properties of asphalt masticConstruction and Building Materials, 2017
- Effects of phosphorus slag powder and polyester fiber on performance characteristics of asphalt binders and resultant mixturesConstruction and Building Materials, 2017
- Effect of mineral fillers adsorption on rheological and chemical properties of asphalt binderConstruction and Building Materials, 2017
- The research for structural characteristics and modification mechanism of crumb rubber compound modified asphaltsConstruction and Building Materials, 2015