Zongjie Yu
Research Subjects
Zongjie Yu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Jie Gao
School of Civil Engineering and Architecture, East China Jiaotong University
1 shared publication - Lei Ma
Xinjiang Institute of Transportation Sciences Co., Ltd., Urumqi 830000, China
1 shared publication - Liang Song
School of Traffic and Transportation Engineering, Xinjiang University, Urumqi 830017, China
1 shared publication - Shujun Liu
Xinjiang Institute of Transportation Sciences Co., Ltd., Urumqi 830000, China
1 shared publication - Xiaodong Xie
Xinjiang Key Laboratory of Highway Engineering Technology in Arid Desert Areas, Urumqi 830099, China
1 shared publication - Xiaosong Liu
Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang’an University, Xi’an 710064, China
1 shared publication
Latest Publications
- Open Access
Rheological and Microstructural Characterization of Steel Slag Powder-Modified Asphalt Mastics: Insights into High-Temperature Performance Enhancement
This study systematically investigates the rheological modification mechanism of steel slag powder (SSP) as an alternative filler in asphalt mastics, with comparative analysis against conventional limestone powder (LP). Four filler-to-asphalt (F/A) ratios (0.6–1.2) were employed to prepare modified mastics. Comprehensive characterization through laser diffraction analysis, BET nitrogen adsorption, and scanning electron microscopy (SEM) revealed SSP’s significant microstructural advantages: a 29.2% smaller median particle size (D50) and 7.06% larger specific surface area compared to LP, accompanied by enhanced interparticle connectivity and morphological complexity. Rheological evaluation via dynamic shear rheology (DSR) demonstrated SSP’s superior performance enhancement—particularly at elevated F/A ratios (1.0–1.2), where multiple stress creep recovery (MSCR) tests showed a 6.9–46.06% improvement in non-recoverable creep compliance (Jnr) over LP-modified counterparts. The temperature sweep analysis indicated SSP’s effectiveness in reducing the temperature susceptibility index by 9.37–18.06% relative to LP. Fourier-transform infrared spectroscopy (FTIR) combined with two-dimensional correlation analysis (2D-COS) confirmed the dominance of physical interactions over chemical bonding in the SSP–asphalt interface. The results establish SSP’s dual functionality as both a rheological modifier and sustainable construction material, providing mechanistic insights for optimizing steel slag utilization in pavement engineering.
Open AccessRheological and Microstructural Characterization of Steel Slag Powder-Modified Asphalt Mastics: Insights into High-Temperature Performance Enhancement
This study systematically investigates the rheological modification mechanism of steel slag powder (SSP) as an alternative filler in asphalt mastics, with comparative analysis against conventional limestone powder (LP). Four filler-to-asphalt (F/A) ratios (0.6–1.2) were employed to prepare modified mastics. Comprehensive characterization through laser diffraction analysis, BET nitrogen adsorption, and scanning electron microscopy (SEM) revealed SSP’s significant microstructural advantages: a 29.2% smaller median particle size (D50) and 7.06% larger specific surface area compared to LP, accompanied by enhanced interparticle connectivity and morphological complexity. Rheological evaluation via dynamic shear rheology (DSR) demonstrated SSP’s superior performance enhancement—particularly at elevated F/A ratios (1.0–1.2), where multiple stress creep recovery (MSCR) tests showed a 6.9–46.06% improvement in non-recoverable creep compliance (Jnr) over LP-modified counterparts. The temperature sweep analysis indicated SSP’s effectiveness in reducing the temperature susceptibility index by 9.37–18.06% relative to LP. Fourier-transform infrared spectroscopy (FTIR) combined with two-dimensional correlation analysis (2D-COS) confirmed the dominance of physical interactions over chemical bonding in the SSP–asphalt interface. The results establish SSP’s dual functionality as both a rheological modifier and sustainable construction material, providing mechanistic insights for optimizing steel slag utilization in pavement engineering.
- Open Access
Viscoelasticity of PPA/SBS/SBR Composite Modified Asphalt and Asphalt Mixtures Under Pressure Aging Conditions
The viscoelastic behavior of asphalt mixtures is a crucial consideration in the analysis of pavement mechanical responses and structural design. This study aims to elucidate the molecular structure and component evolution trends of polyphosphoric acid (PPA)/styrene butadiene styrene block copolymer (SBS)/styrene butadiene rubber copolymer (SBR) composite modified asphalt (CMA) under rolling thin film oven test (RTFOT) and pressure aging (PAV) conditions, as well as to analyze the viscoelastic evolution of CMA mixtures. First, accelerated aging was conducted in the laboratory through RTFOT, along with PAV tests for 20 h and 40 h. Next, the microscopic characteristics of the binder at different aging stages were explored using Fourier-transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) tests. Additionally, fundamental rheological properties and temperature sweep tests were performed to reveal the viscoelastic evolution characteristics of CMA. Ultimately, the viscoelastic properties of CMA mixtures under dynamic loading at different aging stages were clarified. The results indicate that the incorporation of SBS and SBR increased the levels of carbonyl and sulfoxide factors while decreasing the level of long-chain factors, which slowed down the rate of change of large molecule content and reduced the rate of change of LMS by more than 6%, with the rate of change of overall molecular weight distribution narrowing to below 50%. The simultaneous incorporation of SBS and SBR into CMA mixtures enhanced the dynamic modulus in the 25 Hz and −10 °C range by 24.3% (AC-13), 15.4% (AC-16), and reduced the by 55.8% (AC-13), 40% (AC-16). This research provides a reference for the application of CMA mixtures in the repair of pavement pothole damage.Open AccessViscoelasticity of PPA/SBS/SBR Composite Modified Asphalt and Asphalt Mixtures Under Pressure Aging Conditions
The viscoelastic behavior of asphalt mixtures is a crucial consideration in the analysis of pavement mechanical responses and structural design. This study aims to elucidate the molecular structure and component evolution trends of polyphosphoric acid (PPA)/styrene butadiene styrene block copolymer (SBS)/styrene butadiene rubber copolymer (SBR) composite modified asphalt (CMA) under rolling thin film oven test (RTFOT) and pressure aging (PAV) conditions, as well as to analyze the viscoelastic evolution of CMA mixtures. First, accelerated aging was conducted in the laboratory through RTFOT, along with PAV tests for 20 h and 40 h. Next, the microscopic characteristics of the binder at different aging stages were explored using Fourier-transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) tests. Additionally, fundamental rheological properties and temperature sweep tests were performed to reveal the viscoelastic evolution characteristics of CMA. Ultimately, the viscoelastic properties of CMA mixtures under dynamic loading at different aging stages were clarified. The results indicate that the incorporation of SBS and SBR increased the levels of carbonyl and sulfoxide factors while decreasing the level of long-chain factors, which slowed down the rate of change of large molecule content and reduced the rate of change of LMS by more than 6%, with the rate of change of overall molecular weight distribution narrowing to below 50%. The simultaneous incorporation of SBS and SBR into CMA mixtures enhanced the dynamic modulus in the 25 Hz and −10 °C range by 24.3% (AC-13), 15.4% (AC-16), and reduced the by 55.8% (AC-13), 40% (AC-16). This research provides a reference for the application of CMA mixtures in the repair of pavement pothole damage. - Open Access
- 11 October 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (20) , 11193
Study on the Rheological Performance and Microscopic Mechanism of PPA/SBS/SBR Composite-Modified Asphalt Cold Replenishment Liquid
To prepare high-performance asphalt cold replacement liquids, a composite modification preparation process was used to synthesize a styrene–butadiene–styrene (SBS) block copolymer, styrene–butadiene–rubber (SBR) copolymer, and polyphosphate acid (PPA), erucamide/diesel/acrylic ester as surfactants/diluents/reinforcing agent respectively. These six were blended to prepare an asphalt cold replenishment liquid (ACRL), and its modification effect on base asphalt was studied using base asphalt as the control group. A comparative study was conducted on the high- and low-temperature rheological properties and microstructure. The modification mechanisms of high-temperature asphalt cold replenishment liquid (H-ACRL) and low-temperature asphalt cold replenishment liquid (L-ACRL) were studied through dynamic shear rheometry, bending beam rheometry, Fourier-transform infrared spectroscopy, fluorescence microscopy, and atomic force microscopy. The results showed that the optimal dosages of PPA/SBS/SBR in H-ACRL and L-ACRL were (1.2%/5%/3%) and (0.9%/4%/4%), respectively. Within the optimal dosage range, the particles in the cold replenishment fluid were uniformly dispersed in the asphalt to form a dense and continuous network. No new functional groups were generated during the preparation of H-ACRL and L-ACRL, showing that the modifiers (surfactants/diluents/reinforcing agent) were only physically blended with the asphalt.
- 11 October 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (20) , 11193
Open AccessStudy on the Rheological Performance and Microscopic Mechanism of PPA/SBS/SBR Composite-Modified Asphalt Cold Replenishment Liquid
To prepare high-performance asphalt cold replacement liquids, a composite modification preparation process was used to synthesize a styrene–butadiene–styrene (SBS) block copolymer, styrene–butadiene–rubber (SBR) copolymer, and polyphosphate acid (PPA), erucamide/diesel/acrylic ester as surfactants/diluents/reinforcing agent respectively. These six were blended to prepare an asphalt cold replenishment liquid (ACRL), and its modification effect on base asphalt was studied using base asphalt as the control group. A comparative study was conducted on the high- and low-temperature rheological properties and microstructure. The modification mechanisms of high-temperature asphalt cold replenishment liquid (H-ACRL) and low-temperature asphalt cold replenishment liquid (L-ACRL) were studied through dynamic shear rheometry, bending beam rheometry, Fourier-transform infrared spectroscopy, fluorescence microscopy, and atomic force microscopy. The results showed that the optimal dosages of PPA/SBS/SBR in H-ACRL and L-ACRL were (1.2%/5%/3%) and (0.9%/4%/4%), respectively. Within the optimal dosage range, the particles in the cold replenishment fluid were uniformly dispersed in the asphalt to form a dense and continuous network. No new functional groups were generated during the preparation of H-ACRL and L-ACRL, showing that the modifiers (surfactants/diluents/reinforcing agent) were only physically blended with the asphalt.