Study and Modelling of Fluid Flow in Ceramic Foam Filters
Open Access
Abstract
To investigate the fluid flow characteristics of conventional Ceramic Foam Filters (CFFs) of grades 30 and 50, a 2D macro-scale geometry was generated by converting pixel grid images of the filters into vector format images. The flow behaviour through the filter channels was then numerically modelled using the Stocks equation within the Creeping Flow interface of COMSOL Multiphysics®. Through modelling, the average interstitial velocity was estimated and found to be higher than the corresponding value obtained from the Dupuit–Forchheimer equation. The discrepancy obtained suggested that the flow behaviour within the filter channels differed from that based on the simplified assumptions of the equation. The porosity and permeability of the CFFs were evaluated during the post-processing stage using surface integration and user-defined equations. The experimentally determined porosity closely matched the values obtained from the simulation model, demonstrating the reliability of the numerical approach. However, the permeability values from the simulation of CFFs of grades 30 and 50 were higher than those obtained experimentally. This discrepancy can be attributed to the larger channels in the generated geometrical pattern compared to the original CFF structure. The present findings highlight the effectiveness of the proposed methodology in developing a representative macro-scale geometry for CFFs and in simulating fluid flow behaviour.Keywords
Funding Information
- SFI Metal Production (Centre for Research-based Innovation) (237738)
This publication has 22 references indexed in Scilit:
- Pressure drop in flow across ceramic foams—A numerical and experimental studyChemical Engineering Science, 2015
- Wetting behavior of aluminium and filtration with Al2O3 and SiC ceramic foam filtersTransactions of Nonferrous Metals Society of China, 2014
- Experimental flow in various porous media and reconciliation of Forchheimer and Ergun relationsExperimental Thermal and Fluid Science, 2014
- Pore-Level Numerical Simulation of Open-Cell Metal Foams With Application to Aero Engine Separators2014
- Inclusion (particle) removal by interception and gravity in ceramic foam filtersJournal of Materials Science, 2012
- The role of eddies inside pores in the transition from Darcy to Forchheimer flowsGeophysical Research Letters, 2011
- Tomography based determination of permeability, Dupuit–Forchheimer coefficient, and interfacial heat transfer coefficient in reticulate porous ceramicsInternational Journal of Heat and Fluid Flow, 2008
- Analysis of liquid flow through ceramic porous media used for molten metal filtrationMetallurgical and Materials Transactions B, 1995
- Use of digital image analysis to estimate fluid permeability of porous materials: Application of two-point correlation functionsJournal of Applied Physics, 1986
- Normalization constraint for variational bounds on fluid permeabilityThe Journal of Chemical Physics, 1985