Study on Safety Tunneling Technology of Secondary Outburst Elimination by CO2 Gas Fracturing in High Outburst Coal Seam
Preprint
- 26 August 2024
- preprint
- Published by MDPI AG in Preprints.org
Abstract
The No. 3 coal seam in the Yuxi Coal Mine has a measured maximum gas content of 25.59 m3/t, along with a maximum gas pressure of 2.9 MPa, indicating its high risk to gas and outbursts. To mitigate outburst risks of the coal seam, the 1301 working face has been implemented gas pre-drainage measures by grid boreholes from underlying roadways. After one year of extraction, it was confirmed that the gas content at all 33 test sites was below 8 m3/t, meeting the outburst prevention standards. However, during subsequent coal tunnel excavation, the gas desorption index K1 value frequently exceeded the standard, resulting in numerous occurrences of abnormal gas emission or small-scale outbursts. To tackle the challenges associated with safe excavation following the first round regional outburst prevention measures, a research and industrial trial of CO2 gas fracturing(CO2-Frac) technology for secondary outburst prevention and rapid excavation was completed. Results show that the dual-hole and high-pressure (185MPa) CO2-Frac considerably contribute to outburst prevention. K1 exceedances per hundred meters of tunnel excavations were from average 2.54 without CO2-Frac to average 0.28 after the new technology being implemented, leading to a eight fold reduction. Additionally, the monthly excavation footage increased from average 81.64 m without CO2-Frac to average 162.42 m with CO2-Frac, resulting in a 2-fold improvement. The dual-hole and high-pressure CO2-Frac is an advanced technology for safe and efficient excavation for secondary outburst elimination in highly outburst-prone coal seams in the Yuxi Coal Mine, with potential for widespread application in similar coal seam conditions.Keywords
All Related Versions
- Version 1, 2024-08-26, Preprints
- Published version: Processes, 12 (9), 1925.
This publication has 20 references indexed in Scilit:
- Study and application of reasonable parameters for hydraulic punching of layer penetration boreholes in Changping Coal MineEnergy Science & Engineering, 2023
- Effect of N2/CO2 injection and alternate injection on volume swelling/shrinkage strain of coalEnergy, 2023
- Determining the reasonable volume required to inject liquid CO2 into a single hole and displace CH4 within the coal seam in bedding boreholes: case study of SangShuPing coal mineEnergy, 2022
- Micro-fractures in coal induced by high pressure CO2 gas fracturingFuel, 2022
- Morphology of multiple constant height hydraulic fractures versus propagation regimeInternational Journal for Numerical and Analytical Methods in Geomechanics, 2022
- The effect of leakage characteristics of liquid CO2 phase transition on fracturing coal seam: Applications for enhancing coalbed methane recoveryFuel, 2022
- Influences of hydraulic fracturing on microfractures of high-rank coal under different in-situ stress conditionsFuel, 2021
- Effect of Slot Inclination Angle and Borehole-Slot Ratio on Mechanical Property of Pre-cracked Coal: Implications for ECBM Recovery Using Hydraulic SlottingNatural Resources Research, 2019
- Experimental study on crack propagation control and mechanism analysis of directional hydraulic fracturingFuel, 2018
- CO2 gas fracturing: A novel reservoir stimulation technology in low permeability gassy coal seamsFuel, 2017