XZXinsheng Zhang

Xinsheng Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xinsheng Zhang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top Cited Papers
    Open Access

    Study on the Energy Evolution Mechanism and Fractal Characteristics of Coal Failure under Dynamic Loading

    by Haixiao Lin, Wenying Zhang, Shuaifang Guo, Xinsheng Zhang, Li Wang, Jiyun Zhang

    The damage to coal-rock masses induced by mining disturbance cannot be overlooked, and the damage deformation characteristics under dynamic loading urgently require investigation. Therefore, this study employs Split Hopkinson Pressure Bar (SHPB) impact tests to reveal the energy evolution mechanism and fractal characteristics of coal failure under dynamic loading. Research indicates that coal deformation exhibits significant strain rate dependence, with both dynamic strength and energy consumption parameters increasing linearly with strain rate. Energy evolution drives crack development through four stages: no damage, microcrack initiation, macroscopic nucleation, and collapse, where the energy consumption required for crack formation exceeds that for crack propagation throughout the entire development process. The fractal dimension of fragmented coal satisfies a positive correlation with both strain rate and fragmentation energy density. Coal possesses favorable self-similarity, and under this condition, increased strain rate enhances the coal’s ability to resist impact through elevated elastic energy density, thereby further strengthening dynamic strength. This confirms intensified fragmentation degree and refined fragment particle size under high energy consumption conditions, providing theoretical support for the prevention and control of mine dynamic disasters.


  • Open Access

    Pulse Wave and Rock Fracturing Characteristics of Composite Energetic Materials Ignited by Underwater Wire Electrical Explosion

    by Bingbing Meng, Yunxing Cao, Xinsheng Zhang, Lu Chang, Junsheng Zhang, Bin Shi, Shuaifang Guo, Ziyue Ma

    In this study, experiments were conducted to investigate the electric explosion initiation of composite energetic materials (CEMs) by using Cu and NiCr wires in water. The composite energetic material is composed of Al powder and a heater, and there are three formulations after mixing according to the mass ratio (1:1, 1:2, and 1:4). Metal wires with a diameter of 0.5 mm and CEMs were placed inside plexiglass tubes, and two water pressure sensors were arranged at a distance of 50 cm from the wire ignition center; the pulse wave peak pressure and impulse were employed as the parameters for the energy output. Finally, rock fracturing experiments and their mechanical principle analysis were carried out. The results indicate that, compared to a single metal wire electric explosion, it can ignite CEMs to form larger pulse wave energy, and the peak pressure is increased by 3.2 times; the pulse wave peak pressure formed by Cu wire ignition of the CEMs was slightly higher than using NiCr wire under the same conditions, but the impulse generated is the opposite. As the Al powder in the CEMs decreases, the peak pressure gradually increases, which is related to the chemical reactions inside the CEMs. In the experiment of fracturing rocks, water jet and strong light radiation phenomena were discovered, and a complex crack network was formed; the cracks near the pulse center were mainly caused by compressive shear stress, while the cracks in the middle and far parts were mainly formed by radial tensile stress and water wedge action. Finally, with the help of high-speed photography technology, the mechanism by which metal wire electric explosions ignite CEMs in water has been clarified; the combined effects of the shock wave, thermal effect, and light emission generated by the electric explosion of the metal wire drove the release of chemical energy from the CEMs, which is of great significance for the development of this technology.


  • Open Access

    Fractal Evolution Characteristics of Pore Structure in Coal-Acidified Stimulation

    by Dan Zhou, Zhiqiang Lv, Yunxing Cao, Gaofeng Liu, Xinsheng Zhang, Bin Shi, Junsheng Zhang, Shimin Liu

    The pore structure and connectivity of coal are the primary factors influencing the permeability of coal reservoirs. However, clay and carbonate minerals are commonly found filling the pores and fractures within coal. To address the impact of these minerals on fracturing effectiveness, acidic fracturing technology has been introduced. This technique has proven to be an effective measure for enhancing the extraction rate of low-permeability coal seams with high mineral content. In this study, coal samples were treated with a 3% HCl solution, and the changes in the pore structure of the coal before and after acidification were analyzed through low-temperature nitrogen adsorption and X-ray diffraction (XRD) testing. The results were as follows: After acidification, the specific surface area, total pore volume, pore volume in different stages, and average pore size of the coal samples all significantly increased. Specifically, the BET specific surface area grew by an average of 4.8 times and the total pore volume expanded by an average of 7.7 times, with the pore volumes in the pore size ranges of D1 (reflecting pore surface roughness) and D2 (representing pore size distribution uniformity). The acidification mechanism was mainly attributed to the dissolution of carbonate minerals in the coal, which led to the removal of obstructive minerals such as ankerite and calcite that had accumulated in the coal pores. This resulted in the formation of new micropores and microfractures, achieving pore volume enhancement and pore expansion.


  • Open Access

    Research on Enhancing Gas Extraction Efficiency through CO2 Gas Fracturing in Outburst-Prone Coal Seams

    by Baige Yang, Yunxing Cao, Xinsheng Zhang, Junsheng Zhang, Shuaifang Guo

    Given the background of significant Coal Mine gas disasters worldwide, the research and development of efficient gas control technologies have become critical to ensuring mining safety. CO2 gas fracturing (CO2–Frac), an innovative technology for Coal Mine gas control, has demonstrated efficiency in various mining areas across China. However, its application in outburst-prone coal seams is not yet fully understood. This study presents a field-scale CO2–Frac project conducted in an outburst Coal Mine in China, specifically the Pingshu Coal Mine, where the previously employed dense-borehole gas extraction technology failed to efficiently achieve gas extraction and outburst prevention. The CO2–Frac plan was evaluated through fracture propagation experiments utilizing both single-hole and dual-hole configurations, highlighting the advantages of the dual-hole CO2–Frac method. Subsequently, on-site gas extraction tests were conducted to further assess the efficacy of the CO2–Frac plan. The results indicate that (1) In the dual-hole CO2–Frac scheme, the fractured and pressure relief area expanded to approximately 26.82 m2, which is 220% larger than that of the single-hole scheme. (2) The dual-hole CO2–Frac significantly enhanced gas extraction effectiveness, increasing the flow rate from 0.026 to 0.216 m3/min in a 100m borehole, a 7.3-fold improvement. Additionally, the gas extraction period to reach the standard was reduced from 20 to 6 days. These findings conclusively demonstrate that the dual-hole CO2–Frac technique is an effective method for safe excavation in outburst-prone coal seams, providing both theoretical and practical validation for its application in similar geological settings.


  • Open Access

    Study on Safety Tunneling Technology of Secondary Outburst Elimination by CO2 Gas Fracturing in High-Outburst Coal Seam

    by Zongwei Xu, Junsheng Zhang, Yunxing Cao, Zhenzhi Wang, Xinsheng Zhang

    The No. 3 coal seam in the Yuxi Coal Mine has a measured maximum gas content of 25.59 m3/t, along with a maximum gas pressure of 2.9 MPa, indicating its high risk to gas and outbursts. To mitigate outburst risks of the coal seam, the 1301 working face has been implemented with gas pre-drainage measures by grid boreholes from underlying roadways. After one year of extraction, it was confirmed that the gas content at all 33 test sites was below 8 m3/t, meeting the outburst prevention standards. However, during subsequent coal tunnel excavation, the gas desorption index K1 value frequently exceeded the standard, resulting in numerous occurrences of abnormal gas emission or small-scale outbursts. To tackle the challenges associated with safe excavation following the first-round regional outburst prevention measures, a research and industrial trial of CO2 gas fracturing (CO2-Frac) technology for secondary outburst prevention and rapid excavation was completed. The results show that the dual-hole and high-pressure (185 MPa) CO2-Frac considerably contributes to outburst prevention. K1 exceedances per hundred meters of tunnel excavations were from an average of 2.54 without CO2-Frac to an average of 0.28 after the new technology was implemented, leading to an eight-fold reduction. Additionally, the monthly excavation footage increased from an average of 81.64 m without CO2-Frac to an average of 162.42 m with CO2-Frac, resulting in a two-fold improvement. The dual-hole and high-pressure CO2-Frac is an advanced technology for safe and efficient excavation for secondary outburst elimination in highly outburst-prone coal seams in the Yuxi Coal Mine, with potential for widespread application in similar coal seam conditions.


  • Open Access

    Study on Safety Tunneling Technology of Secondary Outburst Elimination by CO2 Gas Fracturing in High Outburst Coal Seam

    by Xu Zongwei, Zhang Junsheng, Cao Yunxing, Wang Zhenzhi, Zhang Xinsheng

    The No. 3 coal seam in the Yuxi Coal Mine has a measured maximum gas content of 25.59 m3/t, along with a maximum gas pressure of 2.9 MPa, indicating its high risk to gas and outbursts. To mitigate outburst risks of the coal seam, the 1301 working face has been implemented gas pre-drainage measures by grid boreholes from underlying roadways. After one year of extraction, it was confirmed that the gas content at all 33 test sites was below 8 m3/t, meeting the outburst prevention standards. However, during subsequent coal tunnel excavation, the gas desorption index K1 value frequently exceeded the standard, resulting in numerous occurrences of abnormal gas emission or small-scale outbursts. To tackle the challenges associated with safe excavation following the first round regional outburst prevention measures, a research and industrial trial of CO2 gas fracturing(CO2-Frac) technology for secondary outburst prevention and rapid excavation was completed. Results show that the dual-hole and high-pressure (185MPa) CO2-Frac considerably contribute to outburst prevention. K1 exceedances per hundred meters of tunnel excavations were from average 2.54 without CO2-Frac to average 0.28 after the new technology being implemented, leading to a eight fold reduction. Additionally, the monthly excavation footage increased from average 81.64 m without CO2-Frac to average 162.42 m with CO2-Frac, resulting in a 2-fold improvement. The dual-hole and high-pressure CO2-Frac is an advanced technology for safe and efficient excavation for secondary outburst elimination in highly outburst-prone coal seams in the Yuxi Coal Mine, with potential for widespread application in similar coal seam conditions.

  • Open Access

    Research on Pore-Fracture Structure Alteration and Gas Emission Homogenization in an Outburst Coal Seam Induced by CO2 Gas Fracturing

    by Baige Yang, Yunxing Cao, Xinsheng Zhang, Junsheng Zhang, Shuaifang Guo

    Considering the alarming frequency of coal mine gas disasters globally, there is an urgent need to develop efficient gas control technologies to ensure mining safety. This study focuses on the problem of high peak gas emission restriction in the process of coal roadway tunneling in outburst coal seams, taking the No. 15 outburst coal seam of the Pingshu Coal Mine as the research object. Based on coal sample testing analysis and the application of CO2 gas fracturing (CO2-Frac) in coal mines, a comprehensive evaluation was conducted on pore-fracture structure alteration and homogenization gas emission effect induced by CO2-Frac, providing technical solutions for coal mine safety production. The results are as follows: (1) CO2-Frac induces fracture propagation and the development of three types of fracture structures: Tri-Wing Fracture, Damage Markers, and Coal Matrix Fragmentation. (2) Following CO2-Frac at 150 MPa, the pore volume and average diameter of pores in the 100-10,000 nm range increased by 128% and 61%, respectively, compared to the pre-CO2-Frac state. (3) During the excavation period, continuous monitoring of the airflow for 3 days showed a significant homogenization of gas emission, with a maximum value of 0.450% and a variance value of 0.0031, indicating a reduction of 31% and 68%, respectively. These results reveal several key findings: The pore-fracture structure alteration enhances gas diffusion and permeation, providing high-speed pathways for gas migration, resulting in a substantial increase in gas extraction efficiency. During coal cutting, the modified coal exhibits homogenized gas emission, eliminating the high peak phenomenon and achieving safe and efficient mining. These findings demonstrate that CO2-Frac has broad potential in gas emission homogenization for widespread application in coal mines with similar gas geological conditions.


  • Open Access

    Confining Stress Response to Hydraulic Fracturing Volumetric Opening on the Representative Volume Element (RVE) Scale

    by Shuaifang Guo, Yunxing Cao, Li Wang, Xinsheng Zhang, Wenying Zhang, Haixiao Lin, Zhengzheng Cao, Bingbing Meng

    Confining stress response is considered an accompanying behavior of hydraulic fracturing. Along these lines, an evaluation model of confining stress response was presented in this work. It was established on a rock representative volume element (RVE) and based on the hydraulic volumetric opening model, which stems from the theories of poroelasticity, breakdown damage, and hydraulic fracture mechanics. From the extracted outcomes, it was demonstrated that the confinement of the stress response depends on the matching among the characteristic parameters (εb,εs,m) of the rock breakdown, the volumetric opening, and channel flow regimes of the fracturing fluid. Examples in four limiting fracturing regimes show that (1) the confinement of the stress response is strongly determined by the existence of various fracturing regimes and takes place in a different manner during fracture initiation and opening. More specifically, during fracturing initiation, the ratio of the confining stress response to the far-field stress (Pcmax/σh) is 2.0500 in the M regime, 1.9600 in the M˜ regime, 2.7126 in the K regime, and 1.7448 in the K˜ regime, while when the fracture is opened, these values (PC/σh) are 1.8994, 1.8314, 1.6378, and 1.2846, respectively. (2) The impact of the confined stress response to the fluid pressure is also affected by the fracturing regimes; e.g., in both M and M˜ regimes, the peak confinement stress responses lag behind peak pore pressures, but in the K and K˜ regimes, lag off disappears. (3) The pore volumetric opening (Vpe) leads to an increase in the confining stress response, while the fracture opening (Vpd) leads to a reduction in the confining stress response.