Rapid fatigue life prediction for spot-welded joint of SUS301 L-DLT stainless steel and Q235B carbon steel based on energy dissipation
Open Access
- 6 November 2018
- journal article
- research article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 10 (11)
Abstract
Spot welding of dissimilar materials can utilize the respective advantage comprehensively, of which reliable prediction of fatigue life is the key issue in the structure design and service process. Taking into account almost all the complex factors that have effects on the fatigue behavior such as load level, thickness, welding nugget diameter, vibrational frequency, and material properties, this article proposed an energy dissipation-based method that is able to predict the fatigue life for spot-welded dissimilar materials rapidly. In order to obtain the temperature gradient, the temperature variations of four-group spot-welded joint of SUS301 L-DLT stainless steel and Q235 carbon steel during high-cycle fatigue tests were monitored by thermal infrared scanner. Specifically, temperature variation disciplines of specimen surface were divided into four stages: temperature increase, temperature decrease, continuous steady increase in temperature, and ultimate drop after the fracture. The material constant C that a spot-welded joint of dissimilar material needs to reach fracture is 0.05425°C·mm3. When the specimen was applied higher than the fatigue limit, the highest error between experimental values and predicted values is 18.90%, and others are lower than 10%. Therefore, a good agreement was achieved in fatigue life prediction between the new method and the validation test results.Keywords
Funding Information
- National Natural Science Foundation of China (51175054)
- Key Subject of Science and Technology Program from China Railway (2016J007-I)
This publication has 26 references indexed in Scilit:
- Rapid determination of fatigue life based on temperature evolutionInternational Journal of Fatigue, 2013
- Energy dissipation under multiaxial thermomechanical fatigue loadingInternational Journal of Fatigue, 2013
- Mechanical Properties of SUS301L Stainless Steel Welded Joints for Railway VehiclesAdvanced Materials Research, 2012
- A study on the hysteresis, surface temperature change and fatigue life of SM490A, SM490A-weld and FC250 metal materialsInternational Journal of Fatigue, 2010
- On the use of infrared thermography for the analysis of fatigue damage processes in welded jointsInternational Journal of Fatigue, 2009
- A parametric study on fatigue strength of spot‐weld jointsFatigue & Fracture of Engineering Materials & Structures, 2008
- Hysteresis, yield, and energy dissipation during thermo-mechanical fatigue of a ferritic steelInternational Journal of Fatigue, 2004
- Rapid determination of the fatigue curve by the thermographic methodInternational Journal of Fatigue, 2002
- Microplastic Strain Hysteresis Energy as a Criterion for Fatigue FractureJournal of Basic Engineering, 1961
- Introduction to thermodynamics of irreversible processesJournal of Chemical Education, 1955