Electrocatalytic conversion of carbon monoxide (CO) is being actively developed as a key component for tandem CO2 electrolysis. Significant effort has been devoted to engineering CO reduction electrocatalysts for better multi-carbon product selectivity. However, less attention has been paid to other performance parameters, such as liquid product concentration and purity, which are crucial for commercializing CO electrolysis. Here, we present an “internally coupled purification” strategy to substantially improve the acetate concentration and purity in CO electrolysis. This improvement was achieved by incorporating both an anode electrocatalyst with high ethanol partial oxidation activity as well as an anion-exchange membrane with high ethanol permeability and good alkaline stability. We have successfully demonstrated stable 120-hour continuous operation of the CO electrolyzer at a fixed current density of 200 mA cm− 2 and a full cell potential of < 2.3 V, producing an acetate product stream with a concentration of 1.9 M and a purity of 97.7%. By tuning the reaction conditions, we also showed that the concentration of the acetate production stream can be further increased to 7.6 M while maintaining a purity of > 99%. Additional mechanistic investigation revealed the roles of anode electrocatalysts and anion-exchange membranes in enhancing the acetate selectivity in CO electrolyzers. Finally, a techno-economic analysis shows that a highly concentrated liquid product stream is essential to reduce the energy consumption associated with the product separation.