Effect of o-MMT content on properties of Poly (vinyl chloride)/Poly (acrylonitrile styrene acrylate) blends
Open Access
- 30 October 2020
- journal article
- research article
- Published by The Turkish Chemical Society in Journal of the Turkish Chemical Society Section A: Chemistry
- Vol. 7 (3) , 635-648
Abstract
In this study, poly(vinyl chloride) (PVC)/poly(acrylonitrile styrene acrylate) (ASA)/ organophilic montmorillonite (o-MMT) nanocomposites were prepared and the effects of o-MMT content on the properties of PVC/ASA blends were investigated. Surface morphology studies of the o-MMT containing blends were also performed using scanning electron microscopy (SEM). The thermal stability, mechanical properties and water absorption percentage of the nanocomposites were studied. TGA test results showed that o-MMT inclusion enhanced the thermal stability of PVC/ASA/o-MMT nanocomposites and the Td50 decomposition temperature increased by 7.5 ˚C when the o-MMT content is 10 wt%. The tensile strength value of the neat blend was obtained as 32.51 MPa and found to increase as 36.01 MPa when the o-MMT content is 6 wt% in the system. The water absorption test results demonstrated that the water-resistance of the samples enhanced as the o-MMT content increased. Moreover, PVC/ASA blends experienced a significant increase in the contact angle by the presence of hydrophobic o-MMT. The weathering test results demonstrate that the PVC/ASA/o-MMT nanocomposite films can be used for outdoor applications without losing their properties too much.Keywords
This publication has 52 references indexed in Scilit:
- Simultaneous surface functionalization and reduction of graphene oxide with octadecylamine for electrically conductive polystyrene compositesCarbon, 2011
- Morphology, mechanical properties, and thermal stability of rigid PVC/clay nanocompositesPolymer Engineering & Science, 2010
- Attachment of 3-(Aminopropyl)triethoxysilane on Silicon Oxide Surfaces: Dependence on Solution TemperatureLangmuir, 2008
- Effects of Accelerated Freeze—Thaw Cycling on Physical and Mechanical Properties of Wood Flour/PVC CompositesJournal of Reinforced Plastics and Composites, 2008
- Preparation and Properties of PVC/EVA/ Organomodified Montmorillonite NanocompositesJournal of Reinforced Plastics and Composites, 2008
- Polyvinyl Chloride/Organoclay Nanocomposites: Effects of Filler Loading and Maleic AnhydrideJournal of Reinforced Plastics and Composites, 2007
- Effects of the compatibilizer PE‐g‐GMA on the mechanical, thermal and morphological properties of virgin and reprocessed LDPE/corn starch blendsPolymers for Advanced Technologies, 2005
- Durability of wood flour‐plastic composites exposed to accelerated freeze–thaw cycling. Part I. Rigid PVC matrixJournal of Vinyl and Additive Technology, 2005
- PVC/montmorillonite nanocomposites based on a thermally stable, rigid‐rod aromatic amine modifierJournal of Applied Polymer Science, 2004
- Polycarbonate/ABS blends: Processability, thermal properties, and mechanical and impact behaviorAdvances in Polymer Technology, 1994