Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yasemin Tamer has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Carrageenan/Gallic Acid Blend Hydrogel Films for Potential Use as Natural Moisture Scavengers in Active Food Packaging

    by Demet Aydınoğlu, Yasemin Balçık Tamer, Nurcan Karaca

    1. Today, one of the most important issues of the food industry is extending the shelf life of food products and preserving food safety, nutritional values as well as sensory properties such as tas...

  • Open Access

    Improvement of flame retardancy and thermal stability of highly loaded low density polyethylene/magnesium hydroxide composites

    by Aykut Yücesoy, Yasemin Balçik Tamer, Hale Berber

    This study aims to enhance the flame retardant efficiency and thermal stability of low density polyethylene (LDPE) by using halogen‐free inorganic additives. To prepare the highly loaded flame retardant polymer composites, LDPE melt mixes with magnesium hydroxide and magnesium carbonate at different weight ratios using a twin‐screw extruder. The composites are characterized by thermogravimetric analysis, crystallinity degree, tensile strength, morphological analysis, limiting oxygen index and UL‐94 vertical burning test. An optimum MH/MC weight ratio of 60/40 provides satisfactory composite properties with increased maximum thermal degradation temperature from 472.3 to 483.5°C, the highest LOI value of 32.5% and a UL‐94 V‐0 rating without melt dripping. The homogeneity of this composite is improved by using a polymeric compatibilizer, MAH‐g‐PE and an enhancement in tensile strength, elongation at break and elastic modulus values of 33.68%, 33.02% and 23.55%, respectively, are obtained. In order to create synergism between the flame retardant additives, 1, 3 and 5 wt% zinc borate is added to the composite system. The incorporation of 5 wt% ZB causes a significant delay in the thermal decomposition of MH with an improvement of 51.8°C in maximum degradation temperature. This composite also exhibits a satisfactory flame retardant grade with a UL‐94 V‐0 rating.


  • Development of citric acid crosslinked biodegradable chitosan/hydroxyethyl cellulose/organo-modified nanoclay composite films as sustainable food packaging materials

    by Yasemin Balçık Tamer

    Chitosan/hydroxyethyl cellulose-based sustainable food packaging composite films (CS/HEC/NC) crosslinked with citric acid (CA) and containing organophilic nanoclay were prepared using the solvent casting method. The physical, thermal, mechanical and barrier properties of as-synthesized composite films were evaluated toward their use as an alternative to petroleum-based polymers. A considerable improvement was observed in surface hydrophobicity, water resistance, barrier properties, tensile strength, and thermal stability of the composite films with increasing nanoclay ratio. CS/HEC/NC3 film loaded with 5 wt% nanoclay exhibited the best physical properties with percent enhancements of 22.94°C, 52.56% and 36.53° in maximum degradation temperature, tensile strength, and water contact angle, respectively, over the neat CS/HEC film. In addition, low permeabilities against water vapor (1.240 × 10−11 gs−1m−1Pa−1) and oxygen (1.12 × 10−16 m3s−1m−1Pa−1), and also strong antibacterial activity against Staphylococcus aureus and Escherichia coli were obtained for this film. The food preservation effects of CS/HEC/NC composite films against cherry tomatoes were also studied, and less than 20% mass loss was achieved in five weeks. Consequently, CS/HEC/NC composite films can be considered competitive packaging materials with great potential to improve safety and quality and extend the shelf life of packaged foods.


  • Open Access

    A New Design of Poly(N-Isopropylacrylamide) Hydrogels Using Biodegradable Poly(Beta-Aminoester) Crosslinkers as Fertilizer Reservoirs for Agricultural Applications

    by Yasemin Balçık Tamer

    Poly(N-isopropylacrylamide) (P(NIPAAm)) hydrogels were prepared by free-radical polymerization with biodegradable poly (β-amino ester) (PBAE) crosslinkers at 1 wt% and 3 wt% ratio, and compared with conventional N,N′-methylene bisacrylamide (MBA)-crosslinked hydrogel. The influence of the type, molecular weight, and diacrylate/amine ratio of the crosslinker on the crosslink density, compressive strength, and swelling and biodegradation behavior of the hydrogels was investigated. The hydrogels synthesized with lower molecular weight PBAE crosslinkers showed higher crosslinking degrees and compressive strength and lower swelling ratios. To reveal the controlled release behavior of the fertilizer, KNO3 was used as the model, and its loading and release behavior from these hydrogels was also examined. The N/T5/1 sample with 1.5/1.0 diacrylate/amine molar ratio and 1 wt% PBAE ratio demonstrated the most controlled release of KNO3 with 66.9% after 18 days in soil. In addition, the hydrogel with the porosity of 71.65% and crosslinking degree of 2.85 × 10−5 mol cm−3 showed a swelling ratio of 69.44 g/g, biodegradation rate of 23.9%, and compressive strength of 1.074 MPa. Thus, it can be concluded that the new designed biodegradable P(NIPAAm) hydrogels can be promising materials as nitrate fertilizer reservoirs and also for controlled fertilizer release in soil media for agricultural applications.


  • Effective removal of crystal violet from aqueous solution by graphene oxide incorporated hydrogel beads as a novel bio-adsorbent: kinetic, isotherm and thermodynamic studies

    by Yasemin Tamer, Hale Berber

    This study revealed the facile preparation of graphene oxide (GO) containing sodium alginate (SA) and hydroxyethyl cellulose (HEC) hydrogel beads that could be used as a low-cost and environmentally friendly bio-adsorbent for the removal of crystal violet (CV). The thermogravimetric analysis (TGA) and absorbency under load (AUL) test results demonstrated that the thermal stability and mechanical strength of SA-HEC hydrogel beads were enhanced by the existence of GO. The SA-HEC/GO bio-adsorbents displayed superior adsorption capability toward cationic CV dye molecules and the adsorption capacity increased from 123.16 mg g−1 to 312.72 mg g−1 at pH 5 by incorporation of 1 wt% GO. The CV adsorption is well-described by pseudo-second-order model and was mainly controlled by intra-particle diffusion. Also, the Langmuir and Temkin isotherm models confirmed the physical monolayer adsorption of CV. The calculated thermodynamic parameters such as Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) indicated that the adsorption of CV onto SA-HEC/GO bio-adsorbents was spontaneous and it was favored at high temperatures. The bio-adsorbent retained its ability to adsorb CV with a removal efficiency of 79.4% for up to six cycles. Graphical Abstract


  • Open Access

    Kinetic, isotherm, and thermodynamic studies for adsorptive removal of basic violet 14 from aqueous solution

    by Yasemi̇n Tamer, Hale Berber

    In this study, the performance of chitosan based semi-IPN nanocomposite hydrogels for the adsorptive removal of basic violet 14 (BV14) from aqueous solution has been explored. Batch adsorption studies were conducted to determine the effect of various parameters on BV14 adsorption, and optimum values were reported as pH of 8, the adsorbent dosage of 0.025 g, initial BV14 concentration of 5 mg L-1 and contact time of 90 min at a temperature of 25 °C. The semi-IPN hydrogel containing 0.5% by weight GO showed the improved adsorption capacity for BV14 compared to the neat hydrogel adsorbent, and the maximum adsorption capacity was 276.21 mg g-1 with a removal efficiency of 90.4%. Kinetic studies have shown that the pseudo-second-order kinetic model can well describe BV14 adsorption. The equilibrium adsorption data showed the best fit with the Langmuir model. Thermodynamic studies revealed that BV14 adsorption was physical in nature and occurred spontaneously and endothermically. The BV14 removal efficiency above 84% was obtained after five consecutive adsorption-desorption cycles, which has proved the reusability performance of the adsorbent and the recovery potential of BV14 dye. Overall, the results of this study indicated that GO containing chitosan based semi-IPN nanocomposite hydrogel could be an effective and environmentally friendly adsorbent for the successful removal of BV14 molecules from aqueous solution.


  • Open Access

    Effect of o-MMT content on properties of Poly (vinyl chloride)/Poly (acrylonitrile styrene acrylate) blends

    by Yunus Emre Kökçan, Yasemin Tamer

    In this study, poly(vinyl chloride) (PVC)/poly(acrylonitrile styrene acrylate) (ASA)/ organophilic montmorillonite (o-MMT) nanocomposites were prepared and the effects of o-MMT content on the properties of PVC/ASA blends were investigated. Surface morphology studies of the o-MMT containing blends were also performed using scanning electron microscopy (SEM). The thermal stability, mechanical properties and water absorption percentage of the nanocomposites were studied. TGA test results showed that o-MMT inclusion enhanced the thermal stability of PVC/ASA/o-MMT nanocomposites and the Td50 decomposition temperature increased by 7.5 ˚C when the o-MMT content is 10 wt%. The tensile strength value of the neat blend was obtained as 32.51 MPa and found to increase as 36.01 MPa when the o-MMT content is 6 wt% in the system. The water absorption test results demonstrated that the water-resistance of the samples enhanced as the o-MMT content increased. Moreover, PVC/ASA blends experienced a significant increase in the contact angle by the presence of hydrophobic o-MMT. The weathering test results demonstrate that the PVC/ASA/o-MMT nanocomposite films can be used for outdoor applications without losing their properties too much.


  • Lysine-derived, pH-sensitive and biodegradable poly(beta-aminoester urethane) networks and their local drug delivery behaviour

    by Yasemin Tamer, Biqiong Chen

    In this study, a series of covalently crosslinked, L-lysine based poly(beta-aminoester urethane) (LPBAEU) networks with good biodegradability and pH sensitivity was reported. The effect of hydrophilic/hydrophobic characteristics and diacrylate/amine molar ratio on the structure, swelling and degradation behaviour of the networks was investigated. The water transport mechanism and dynamic swelling behavior of the LPBAEU networks were strongly affected by medium pH, and swelling amounts up to 252.2% and 148.7% were observed at pH 5.6 and pH 7.4, respectively. It was found that water diffusion within the networks followed a non-Fickian mechanism. The LPBAEU network with the highest diacrylate/amine molar ratio exhibited the highest tensile strength and Young's modulus. In vitro mass losses of networks showed that the degradation rate of LPBAEU networks can be adjusted from 4 to 14 days. LPBAEU networks also supported loading of doxycycline hyclate (DH) and in vitro release studies demonstrated that release of DH from the networks was substantially hindered in the neutral pH environment, with 20.9–56.2% DH release, whereas DH release was accelerated under mild acidic conditions, with a release percentage of 36.6–99.6%. The release data were fitted to different mathematical models and the obtained results confirmed that these networks released DH in a non-Fickian mechanism. The results of this research support the idea that pH-responsive LPBAEU networks may find potential applications in local drug delivery.