Precise Method to Estimate the Herschel-Bulkley Parameters from Pipe Rheometer Measurements
Open Access
Abstract
Accurate characterization of the rheological behavior of non-Newtonian fluids is critical in a wide range of industries as it governs process efficiency, safety, and end-product quality. When the rheological behavior of fluid may vary substantially over a relatively short period of time, it is desirable to measure its viscous properties on a more continuous basis than relying on spot measurements made with a viscometer on a few samples. An attractive solution for inline rheological measurements is to measure pressure gradients while circulating fluid at different bulk velocities in a circular pipe. Yet, extracting the rheological model parameters may be challenging as measurement uncertainty may influence the precision of the model fitting. In this paper, we present a method to calibrate the Herschel-Bulkley rheological model to a series of differential pressure measurements made at variable bulk velocities using a combination of physics-based equations and nonlinear optimization. Experimental validation of the method is conducted on non-Newtonian shear-thinning fluid based on aqueous solutions of polymers and the results are compared to those obtained with a scientific rheometer. It is found that using a physics-based method to estimate the parameters contributes to reducing prediction errors, especially at low flow rates. With the tested polymeric fluid, the proportion difference between the estimated Herschel-Bulkley parameters and those obtained using the scientific rheometer are −24% for the yield stress, 0.26% for the consistency index, and 0.30% for the flow behavior index. Finally, the computation requires limited resources, and the algorithm can be implemented on low-power devices such as an embedded single-board computer or a mobile device.Keywords
This publication has 25 references indexed in Scilit:
- In-pipe rheology and mixing characterisation using electrical resistance sensingChemical Engineering Science, 2018
- Analytical solutions for the flow of Carreau and Cross fluids in circular pipes and thin slitsRheologica Acta, 2015
- Resonant Steel Tuning Forks for Precise Inline Viscosity and Mass Density Measurements in Harsh EnvironmentsProcedia Engineering, 2014
- Measurement of fluid velocity development in laminar pipe flow using laser Doppler velocimetryEuropean Journal of Physics, 2013
- Simultaneous Continuous Monitoring of the Drilling-Fluid Friction Factor and DensitySPE Drilling & Completion, 2013
- Flows and heterogeneities with a vane tool: Magnetic resonance imaging measurementsJournal of Rheology, 2011
- Methodology for in-line rheology by ultrasound Doppler velocity profiling and pressure difference techniquesChemical Engineering Science, 2007
- Rheological modelling of complex fluids. I. The concept of effective volume fraction revisitedThe European Physical Journal Applied Physics, 1998
- An Improved Mathematical Model for Relating Shear Stress to Shear Rate in Drilling Fluids and Cement SlurriesSociety of Petroleum Engineers Journal, 1976
- Konsistenzmessungen von Gummi-BenzollösungenColloid and Polymer Science, 1926