Purpose. To investigate the composition of the technological material, its technological load on the working parts of the combine, and to substantiate ways to increase the volume of corn cob harvesting by an axial-rotor combine.. Methods. Methods of scientific planning of experiments were used to determine the composition of the technological material and its technological load on the working bodies of the combine. Statistical processing of results were performed using a personal computer and mathematical software products using the following computer software packages: Microsoft Excel and StatSoft Statistica. Results. A set equipment for of the New Holland CR9.80 combine harvester for collecting corn cobs was developed and manufactured. The structure of the flows of process materials in the grain harvester during harvesting corn grain was studied. The density of the components of the non- grain part of the crop and their mixtures was studied. Conclusions. The research has shown that when threshing corn with a New Holland CR9.80 combine, about 48.1 % of the cobs from the total volume of corn rods enter the sieve, and the average length is 100–130 mm. With such cobs sizes and the use of a punched-type sieve with 50 mm diameter holes, only small part of the cobs enter the combine bunker. When the mass fraction of corn cob reaches 15–20 %, the bulk density of the grain-cob mixture will be 520–560 kg/m , i.e. it will decrease by 1.25– 1.35 times. In this case, the volume of technological material entering the combine bunker will increase by 1.5–1.7 times compared to harvesting only grain, with the same combine productivity. To significantly increase the volume of cobs entering the combine bunker, it is necessary to reduce the separation of cobs longer than 50 mm in the threshing zone and ensure their additional crushing in the separation zone of the threshing and separating device and, due to this, intensify the arrival of chopped cobs up to 25–50 mm long to the harvester sieve. Keywords: corn, harvester, sieve, corn-cob mix, harvesting.