Lift-Off Process for Patterning of a Sputter-Deposited Thick Metal Stack for High Temperature Applications on 4H-SiC
Open Access
- 22 August 2024
- journal article
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 359, 71-77
Abstract
With the rising need for power devices suitable for harsh environment conditions like high temperature applications, contact materials and packaging of the devices have become critical factors in device fabrication [1, 2]. Therefore, a contact metal stack containing silver and titanium nitride which can be used at elevated temperatures under oxygen atmosphere was investigated. For patterning of the approx. 2 µm thick sputter-deposited metal stack on the wafer front side, a lift-off process using a negative photoresist was established. Characterization of the photoresist sidewall shape was performed by cross-sectional views prepared with SEM and top view images taken on a microscope. It was found that for a successful lift-off, a distinct undercut is needed so no metal is deposited at the downside of the undercut, ensuring a metal-free surface for the solvent to reach the photoresist. To obtain this, most influencing factors are exposure dose and development time, which were optimized considering the undercut shape as well as pattern fidelity. Lift-off with acetone proved to be good for the fabricated 4H-SiC MOSFET devices.Keywords
This publication has 9 references indexed in Scilit:
- LTCC Embedding of SiC Power Devices for High Temperature Applications over 400 °C2020
- Development of Lift-off Photoresists with Unique Bottom ProfileTransactions of The Japan Institute of Electronics Packaging, 2015
- Chemical Etching and Patterning of Copper, Silver, and Gold Films at Low TemperaturesECS Journal of Solid State Science and Technology, 2014
- Performance evaluation of SiC power MOSFETs for high-temperature applications2012
- A Bondable Metallization Stack That Prevents Diffusion of Oxygen and Gold into Monolithically Integrated Circuits Operating Above 500°CJournal of Electronic Materials, 2011
- Dielectric functions of bulk 4H and 6H SiC and spectroscopic ellipsometry studies of thin SiC films on SiJournal of Applied Physics, 1999
- Thermal Stability of Hafnium and Titanium Nitride Diffusion Barriers in Multilayer Contacts to SiliconJournal of the Electrochemical Society, 1983
- Electrical Characteristics of Contacts Contaminated with Silver Sulfide FilmIEEE Transactions on Parts, Materials and Packaging, 1970
- Optical Constants of Silicon in the Region 1 to 10 evPhysical Review B, 1960