Effect of carbon coating on surface structure in annealing process of high-dose implanted/annealed SiC
Open Access
- 8 May 2024
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (18)
Abstract
The effect of carbon coating on a surface structure of a high-dose implanted/annealed silicon carbide (SiC) during annealing was examined using scanning probe microscopy (SPM), deep-ultraviolet (DUV) Raman spectroscopy, and transmission electron microscopy (TEM). In SPM, the surfaces of 500- and 30 °C-implanted/annealed SiC samples without coating exhibited a periodic-step structure and granular structure, respectively. The difference between these surfaces is attributed to the absence or presence of residual implantation damage. In contrast, surface flatness was maintained in the 500 °C-implanted/annealed SiC sample with carbon coating. However, the surface of the coated 30 °C-implanted/annealed SiC sample exhibited a geometric structure with a lattice pattern parallel to the ⟨112¯0⟩ axes. The DUV Raman spectra and TEM images indicated that the implanted layer of this sample metamorphosed into a mixture of 3C-SiC twin domains and amorphous-SiC regions. During the cooling process after annealing, the 3C-SiC region was more raised than the amorphous-SiC region owing to the difference in the thermal expansion coefficients, thus resulting in the generation of a geometric surface structure. In the metamorphosed implanted layer, the carbon coating does not completely prevent surface roughening.Keywords
This publication has 50 references indexed in Scilit:
- Insights into the effects of Al-ion implantation temperature on material properties of 4H-SiCApplied Surface Science, 2022
- Characterization of Defect Structure in Epilayer Grown on On-Axis SiC by Synchrotron X-ray TopographyJournal of Electronic Materials, 2022
- The damage investigations of 4H–SiC after P-ion irradiationApplied Physics A, 2020
- Surface defects and accompanying imperfections in 4H–SiC: Optical, structural and electrical characterizationActa Materialia, 2012
- Deuterium permeation and thermal behaviors of amorphous silicon carbide coatings on steelsFusion Engineering and Design, 2011
- Investigation of the 4H–SiC surfaceApplied Surface Science, 2008
- Comparison of Solid-State Microwave Annealing with Conventional Furnace Annealing of Ion-Implanted SiCJournal of Electronic Materials, 2007
- Surface roughening in ion implanted 4H-silicon carbideJournal of Electronic Materials, 1999
- Dopant activation and surface morphology of ion implanted 4H- and 6H-silicon carbideJournal of Electronic Materials, 1998
- Production implanter Nissin NH-20SRNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1989