Corrosion behavior and durability of Si-DLC films on high-strength steel under hydrostatic pressure

Authors:
  • JZJiazhong Zhou
    Jiazhong Zhou
  • QWQian Wang
    Qian Wang
  • SLSai Li
    Sai Li
  • TZTan Zhao
    Tan Zhao
  • YZYanwen Zhou
    Yanwen Zhou

Abstract
Mechanisms of hydrostatic pressure on corrosion behavior and durability of silicon-doped diamond-like carbon (Si-DLC) films prepared by plasma-enhanced chemical vapor deposition on the surface of GPa-grade ultra-high-strength steel (GPa steel) have been investigated under simulated deep-sea conditions. The results demonstrated that in 3.5 wt.% NaCl at 5°C with hydrostatic pressures of 0.1 to 8 MPa show that increasing pressure shifts the corrosion potential from −321.5 to −469.1 mV and raises the corrosion current density from 1.09 × 10−8 to 5.14 × 10−7 A•cm−2, indicating pressure-accelerated corrosion in the early stage. After 15 days exposure, film porosity at 0.1 MPa increases from 0.0056% to 0.3712% (≈66-fold), whereas at 8 MPa it rises by only about twofold due to the accumulation of dense α-FeOOH, Fe3O4 and SiO2 that replaces loose γ-FeOOH and blocks transport pathways. This pressure-induced self-healing effect shifts the rate-controlling step from charge-transfer to diffusion control and is quantitatively supported by the evolution of the activation volume |[[EQUATION]]|. The results demonstrate robust corrosion resistance of Si-DLC/GPa steel systems for deep-sea engineering applications.

This publication has 40 references indexed in Scilit: