Numerical Analysis of the Axial-Flexural Behavior of CFST Columns with Active Transverse Prestressing
Open Access
- 22 September 2023
- Vol. 13 (10) , 2411
Abstract
This paper presents a numerical study on the vertical (axial) and lateral (flexure) behavior of CFST (Concrete-Filled Steel Tube) columns with active hoop prestress achieved by bolting together two steel half-tubes. Twelve prototype CFST column specimens differing in the prestressing force (three levels) and in the gravity loading ratio (four levels) are analyzed; they are selected to represent typical ground columns of mid-rise buildings. Their structural behavior is simulated with a nonlinear model implemented in Abaqus; concrete and steel behavior are described with a damage-plasticity and a plasticity model, respectively. The concrete-steel interaction is represented by a hard (compression-only) surface-to-surface contact model. The calculations involve three consecutive loading steps: (i) transverse prestress, (ii) axial force, and (iii) lateral loading (shear force and bending moment). The calculation results show that the axial-flexural capacity of the prototype CFST columns is adequate. However, the hoop prestress benefit on axial compressive performance is not outstanding because the tube transverse Poisson expansion impairs the concrete confinement. The benefit in the flexural performance is smaller, due to the lack of sectional lateral expansion during bending. Preliminary studies on mid-rise buildings equipped with the prototype CFST columns show that their gravity and wind capacities are largely enough; conversely, their seismic strength is sufficient only for moderate earthquakes.Keywords
All Related Versions
Funding Information
- Spanish Research Agency (AEI) of the Ministry of Science and Innovation (MICIN) (PID2020-117374RB-I00/AEI/10.13039/501100011033, SKLGP2020K010, 201906560013)
- State Key Laboratory of Geohazard Prevention and Geoenvironment Protection of China (PID2020-117374RB-I00/AEI/10.13039/501100011033, SKLGP2020K010, 201906560013)
- Chinese Government Scholarship (PID2020-117374RB-I00/AEI/10.13039/501100011033, SKLGP2020K010, 201906560013)
This publication has 21 references indexed in Scilit:
- New methodology for calculating damage variables evolution in Plastic Damage Model for RC structuresEngineering Structures, 2017
- Experimental behaviour of circular concrete filled steel tube columns and design specificationsThin-Walled Structures, 2016
- Fire behavior of axially loaded slender high strength concrete-filled tubular columnsJournal of Constructional Steel Research, 2011
- Experimental study of high strength concrete-filled circular tubular columns under eccentric loadingJournal of Constructional Steel Research, 2011
- Nonlinear Analysis of Axially Loaded Concrete-Filled Tube Columns with Confinement EffectJournal of Structural Engineering, 2003
- Uniaxial stress–strain relationship of concrete confined by various shaped steel tubesEngineering Structures, 2001
- Axially Loaded Concrete-Filled Steel TubesJournal of Structural Engineering, 1998
- Plastic-Damage Model for Cyclic Loading of Concrete StructuresJournal of Engineering Mechanics, 1998
- A distributed plasticity model for concrete-filled steel tube beam-columns with interlayer slipEngineering Structures, 1998
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989