Switch Fault Detection and Localization for T-Type Converter
- 2 February 2023
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (3) , 3543-3551
Abstract
Over the past decade, multilevel converters have received considerable interest in medium voltage applications. A large number of active switches in a multilevel converter increases the probability of switch failure and decreases the reliability of the system. An open switch fault can lead to a malfunction of the whole system and should be diagnosed as soon as possible. In this paper, an open-switch fault diagnosis method for a five-level H-Bridge T-type converter is presented. The proposed fault detection method and the fault localization algorithm are based on the switching patterns and the converter output voltage level observation. This approach is capable to detect and localize an open circuit fault for all switches. First, it is validated by simulations in Matlab Simulink and Simscape toolbox environments. Experimental results are also presented and discussed to validate the simulation results.Keywords
This publication has 31 references indexed in Scilit:
- Open-Circuit Fault Diagnosis and Tolerance Strategy Applied to Four-Wire T-Type Converter SystemsIEEE Transactions on Power Electronics, 2018
- An Intelligent-Based Fault-Tolerant System for Solar-Fed Cascaded Multilevel InvertersIEEE Transactions on Energy Conversion, 2017
- Fault detection method for IGBT open-circuit faults in the modular multilevel converter based on predictive model2017
- A Novel Hybrid Five-Level Voltage-Source Converter Based on T-Type Topology for High-Efficiency ApplicationsIEEE Transactions on Industry Applications, 2017
- Logic-Based Methods for Intelligent Fault Diagnosis and Recovery in Power ElectronicsIEEE Transactions on Power Electronics, 2016
- Continuity of Service of Five-Level H-Bridge T-Type Converter Under Open-circuit Switch Failure2016
- Fault detection and diagnosis in a PV grid-connected T-type three level inverter2015
- Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter SystemsIEEE Transactions on Power Electronics, 2014
- FPGA based fault detection and fault tolerance operation in DC-DC converters2014
- Tolerance controls for open-switch fault in a grid-connected T-type rectifier at low modulation index2014