Spatial Atomic Layer Deposition of Aluminum Oxide as a Passivating Hole Contact for Silicon Solar Cells
- 4 July 2020
- journal article
- research article
- Published by Wiley in Physica Status Solidi (a)
- Vol. 217 (18)
Abstract
Herein, tunneling aluminum oxide (Al2O3) passivation layers are demonstrated to be a candidate for hole collecting, passivating contacts when coupled with a boron‐doped surface. These very thin Al2O3 films (1.5–3 nm) are deposited using spatial atomic layer deposition (ALD) on boron diffused (110–115 Ω □−1) hydrophilic surfaces operating as metal–insulator–semiconductor (MIS) contacts. The emitter saturation current density values of ≈57 fA cm−2 are achieved for the Al2O3 film thicknesses of 2 nm before metallization. At this same thickness, the contact resistivity values of 33 mΩ cm2 are obtained after metallization. Most importantly, the boron diffusion, wet chemical surface preparation, and spatial ALD of Al2O3 used to create these MIS structures are all performed with industrially relevant equipment on Cz wafers.Keywords
This publication has 39 references indexed in Scilit:
- Passivation, conductivity, and selectivity in solar cell contacts: Concepts and simulations based on a unified partial-resistances frameworkJournal of Applied Physics, 2019
- Passivating contacts for crystalline silicon solar cellsNature Energy, 2019
- Passivating Contacts for Crystalline Silicon Solar Cells: From Concepts and Materials to ProspectsIEEE Journal of Photovoltaics, 2018
- Interdigitated back contact solar cells with polycrystalline silicon on oxide passivating contacts for both polaritiesJapanese Journal of Applied Physics, 2017
- Contact Selectivity and Efficiency in Crystalline Silicon PhotovoltaicsIEEE Journal of Photovoltaics, 2016
- Carrier-selective contacts for Si solar cellsApplied Physics Letters, 2014
- Silicon heterojunction solar cell with passivated hole selective MoOx contactApplied Physics Letters, 2014
- A Roadmap for PERC Cell Efficiency towards 22%, Focused on Technology-related ConstraintsEnergy Procedia, 2014
- Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristicsSolar Energy Materials and Solar Cells, 2014
- High-efficiency Silicon Heterojunction Solar Cells: A ReviewGreen, 2012