Effect of DBD Plasma Deposition of Fluorine Elements on the AFEP Insulation Performance
- 12 February 2026
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (3) , 1063-1074
Abstract
Gas-insulated switchgear (GIS) is a key piece of equipment in ultrahigh-voltage (UHV) substations. As its core component, the performance of the insulation rod directly determines the operational reliability of the equipment. Aramid fiber-reinforced epoxy resin composite (AFEP) material, due to its excellent insulation and mechanical properties, has become an ideal material for insulation rods. However, aramid fibers have low surface activity and poor interfacial bonding with epoxy resin, which can easily induce partial discharges. Therefore, this article proposes a dielectric barrier discharge (DBD) plasma element deposition modification scheme. Using CF4 as a precursor, aramid fibers were modified through the physical etching and chemical grafting effects of plasma. The influence patterns and regulation mechanisms of plasma fluorine element deposition on the interfacial bonding characteristics and insulation properties of AFEP were studied. The results show that plasma can graft fluorine-containing groups onto the surface of aramid fibers, forming a fluorinated layer. This enhances the interfacial bonding strength through chemical bonding and physical anchoring effects, with the interlaminar shear strength (ILSS) increasing by up to 45.19%. Meanwhile, fluorination is beneficial for increasing trap energy levels and significantly improving the breakdown field strength, with a maximum increase of 71.1%. Combined with molecular dynamics simulations, the mechanism by which fluorine element deposition affects insulation properties was revealed.Keywords
Funding Information
- State Grid Corporation of China Science and Technology Project (5700-202455338A-2-1-ZX)
This publication has 31 references indexed in Scilit:
- Enhanced aramid fiber epoxy resin composites insulation properties via π-π stacking driven ZnONW heterojunction growth to reconstruct aramid fiber surfaceComposites Part B: Engineering, 2025
- Constructing aramid nanofibers self-assembly structure on fiber surface with electric field-assisted enhances insulation performance of aramid fiber reinforced epoxy resinApplied Surface Science, 2025
- Enabling highly tensile insulating aramid-epoxy composites via interface co-valent bondingComposites Science and Technology, 2023
- Effect of liquid diffusion and segregation on GFRP insulation performance in typical hygrothermal environmentComposites Part B: Engineering, 2022
- Effects of aramid nanofibers on the mechanical properties of epoxy resin and improved adhesion with aramid fiberPolymer Composites, 2022
- Two-stage interface enhancement of aramid fiber composites: Establishment of hierarchical interphase with waterborne polyurethane sizing and oxazolidone-containing epoxy matrixComposites Science and Technology, 2020
- Preparation and Characterization of Surface Modified PPTA Fibers by Ultrasonic-Assisted Hydrogen Peroxide SolutionsFibers and Polymers, 2019
- Improving adhesion between aramid fibers and natural rubber through morphological and synthetic modification of the fibersJournal of Applied Polymer Science, 2017
- Surface ammonification of the mutual‐irradiated aramid fibers in 1,4‐dichlorobutane for improving interfacial properties with epoxy resinJournal of Applied Polymer Science, 2017
- Interface correlation and toughness matching of phosphoric acid functionalized Kevlar fiber and epoxy matrix for filament winding compositesComposites Science and Technology, 2008