Synergistic Enhancement of Physicomechanical Performance and Microstructural Integrity in Hydrothermally Synthesized Autoclaved Lightweight Aggregates Through Quicklime–Fly Ash Blends
Open Access
Abstract
Herein, fly ash aggregates (FAAs) were synthesized through a hydrothermal process, utilizing fly ash (FA) and quicklime at a temperature of 180 °C under saturated steam conditions. The study focused on analyzing the ramifications of varying quicklime content on the physicomechanical attributes of the resultant FAAs. A comprehensive examination of mineralogical composition, microstructure, insoluble matter content, and loss on ignition was conducted to elucidate the mechanisms through which quicklime influences the cylinder compressive strength of the FAAs. An observed trend indicated that as the quicklime content increased, the water requirement during the granulation process also increased. Consequently, there was a gradual augmentation in the water absorption capacity of the FAAs, accompanied by a progressive decrement in their apparent density. The augmentation in the filling effect, attributed to the hydration products, led to a steady rise in cylinder compressive strength as the quicklime content escalated from 5 wt.% to 25 wt.%. However, beyond this threshold, between 25 wt.% and 45 wt.%, a decrement in cylinder compressive strength was noted due to the deterioration of the micro-aggregate effect. The interplay between the filling effect and the micro-aggregate effect resulted in the cylinder compressive strength of the FAAs peaking at 13 MPa at a quicklime content of 25 wt.%. The overarching objective of this research is to propose an efficacious approach for mitigating solid waste, with a particular emphasis on reducing the burden of FA. This study provides insights into optimizing FAAs through the modulation of quicklime content, thereby fostering advancements in waste management and resource recovery.Keywords
Funding Information
- Putian University Zixiao Scholars—Young Top Talent Program-2024 (2024174, 2023J01999, JAS24117, 2024051, ZX2024-12)
- Natural Science Foundation of Fujian (2024174, 2023J01999, JAS24117, 2024051, ZX2024-12)
- General Project of the Fujian Provincial Education and Scientific Research Program for Young and Middle-aged Teachers and Researchers (Social Sciences) (2024174, 2023J01999, JAS24117, 2024051, ZX2024-12)
- Startup Fund for Advanced Talents of Putian University (2024174, 2023J01999, JAS24117, 2024051, ZX2024-12)
- Mulan River Comprehensive Governance Research Institute of Putian University (2024174, 2023J01999, JAS24117, 2024051, ZX2024-12)
This publication has 30 references indexed in Scilit:
- Properties of artificial lightweight aggregates prepared from coal and biomass co-fired fly ashes and sewage sludge fly ashCeramics International, 2024
- High strength porous ceramics and its potential in adsorption and building materials: A short process to co-disposal secondary aluminum dross and quicklimeConstruction and Building Materials, 2023
- Effect of curing time and temperature on the mechanical properties of green and ultra-high-strength non-sintered aggregate via autoclave technologyConstruction and Building Materials, 2023
- The toxic leaching behavior of MSWI fly ash made green and non-sintered lightweight aggregatesConstruction and Building Materials, 2023
- Preparation of High-strength ceramsite from municipal solid waste incineration fly ash and clay based on CaO-SiO2-Al2O3 systemConstruction and Building Materials, 2023
- Thermal resistance, water absorption and microstructure of high-strength self-compacting lightweight aggregate concrete (HSSC-LWAC) after exposure to elevated temperaturesConstruction and Building Materials, 2022
- Resourceful utilization of quarry tailings in the preparation of non-sintered high-strength lightweight aggregatesConstruction and Building Materials, 2022
- Mechanical properties and durability of high-performance concrete internally cured using lightweight aggregatesConstruction and Building Materials, 2021
- Influence of lightweight aggregates on the physical and mechanical residual properties of concrete subjected to high temperaturesConstruction and Building Materials, 2021
- Study of high performance autoclaved shell-aggregate from propylene oxide sludgeConstruction and Building Materials, 2011