An efficient post-installed shear-strengthening solution for RC structural elements
Open Access
- 13 June 2025
- journal article
- research article
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 409, 11003
Abstract
Much of Europe’s building stock and infrastructure were constructed in the last century, often before strict design standards were adopted. Ageing materials, increased loading demands, sustainability requirements, and cost-efficiency goals further support the need for the retrofitting of existing reinforced concrete (RC) structures rather than their demolition and replacement. Motivated by these considerations, a new post-installed (PI) shear strengthening system was developed. In this solution, threaded rods bonded in drilled holes act as a substitute for traditional cast-in (CI) stirrups. An extensive experimental campaign consisting of several large-scale beams was executed to rigorously assess and quantify the new system’s performance, leading to a “general construction technique permit” in Germany (Allgemeine Bauartgenehmigung, aBG). The campaign investigated experimentally the main parameters that influence the shear resistance in RC beams, namely: shear and longitudinal reinforcement ratios, effective depth, and concrete compressive strength. The longitudinal rebars in tension were instrumented, allowing detailed tracking of strains during all tests. Results were compared with current Eurocode 2 provisions for concrete members with shear reinforcement, demonstrating that the shear resistance mechanism of the new PI solution closely matches that of conventional CI stirrups, with similar structural performance, highlighting its effectiveness as an efficient retrofitting solution.Keywords
This publication has 13 references indexed in Scilit:
- Thermische Vorspannung nachträglich ergänzter Bewehrung – experimentelle Umsetzung an BalkenBeton- und Stahlbetonbau, 2025
- Bond stresses in post‐installed reinforcing bars derived via fiber optic sensorsStructural Concrete, 2024
- Shear bond between existing concrete and high‐strength fiber reinforced overlay: Influence of substrate strength and interface roughnessStructural Concrete, 2023
- Experimental cyclic behavior of concrete interfaces with postinstalled reinforcing bars or alternative connectorsStructural Concrete, 2023
- Influence of amount of shear reinforcement and its post‐yield response on the shear resistance of reinforced concrete membersStructural Concrete, 2022
- A comparative evaluation of strain measurement techniques in reinforced concrete structures–A discussion of assembly, application, and accuracyStructural Concrete, 2021
- The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer actions of RC membersEngineering Structures, 2021
- Nachhaltige Bauwerksverstärkung mit Betonschrauben2021
- First experiences with concrete screw anchors as postinstalled shear reinforcement in concrete bridgesCivil Engineering Design, 2019
- The behavior of an in-service plate girder bridge strengthened with external prestressing tendonsEngineering Structures, 2005