Performance evaluation of superplasticizers in one part geopolymer mortar
Open Access
- 27 March 2026
- journal article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
The widespread adoption of one-part geopolymer cement (OPGC) is constrained by its intrinsically low workability, which limits handling, casting, and field implementation. This study introduces a dry-mix technological strategy in which powdered superplasticizers (SPs) are directly pre-blended with the geopolymer binder, thereby eliminating on-site liquid admixture dosing and enhancing practical constructability. Powdered sulfonated naphthalene formaldehyde (SNF) and polycarboxylate ether (PCE) were incorporated at 0.5-2.5% by binder weight into an OPGC mortar composed of ground granulated blast furnace slag (GGBS), diatomite, and feldspar, activated using solid sodium hydroxide and anhydrous sodium silicate. Fresh performance, mechanical behavior, and in-situ quality indicators were evaluated through flowability, setting time, compressive, flexural, and split tensile strengths, ultrasonic pulse velocity, and rebound hammer testing. Chemical stability and microstructural evolution were examined via zeta potential, ATR-FTIR, XRD, SEM, and EDS analyses. The incorporation of 1% SNF yielded a 272.9% increase in relative slump and a 15.44% enhancement in 28-day compressive strength compared with the control, achieving a peak strength of 53.8 MPa. In contrast, PCE produced marginal workability gains (< 15%) and caused substantial strength reductions (up to 47%) to higher dosages. Spectroscopic and zeta potential analyses confirmed the chemical robustness of SNF under highly alkaline conditions, whereas PCE exhibited structural degradation and adverse dispersion behavior. Microstructural observations revealed denser and more homogeneous geopolymer gel matrix in SNF-modified systems. All SNF-based mortars exceeded 43 MPa at 28 days, matching the performance benchmark of 43-grade Ordinary Portland Cement while delivering an estimated 16-25% cost reduction. These findings demonstrate that the dry incorporation of SNF provides a scalable and industry-compatible pathway for producing high-performance, user-friendly one-part geopolymer binders, advancing their viability for practical construction applications.Keywords
This publication has 61 references indexed in Scilit:
- NaHCO3 solution carbonation recycled powder for novel alkali-activated concrete: Synergistic enhancement in mechanical properties, durability, and environmental impactCement and Concrete Composites, 2026
- Seawater-mixed alkali-activated materials: a state-of-the-art reviewJournal of Materials Science, 2025
- Extrudability of geopolymers and control of the formed networks by zeta potential and NMR spectroscopyInternational Journal of Ceramic Engineering & Science, 2024
- Characteristic of One-Part Geopolymer as Building Materials2021
- Effect of SNF-Based Superplasticizer on Physical, Mechanical and Thermal Properties of the Geopolymer ConcreteSilicon, 2021
- The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastesCement and Concrete Composites, 2019
- Advances in alternative cementitious bindersCement and Concrete Research, 2011
- Mechanism of geopolymerization and factors influencing its development: a reviewJournal of Materials Science, 2007
- Effect of superplasticizer and shrinkage-reducing admixtures on alkali-activated slag pastes and mortarsCement and Concrete Research, 2005
- Geopolymeric materials prepared using Class F fly ash and elevated temperature curingCement and Concrete Research, 2005