Missgna Addisalem Berhe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Missgna Addisalem Berhe has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Blessen Skariah Thomas
National Institute of Technology Calicut, Kozhikode, India
7 shared publicationsPraveen Nagarajan
National Institute of Technology Calicut, Kozhikode, India
5 shared publicationsJ. Sudhakumar
Department of Civil Engineering, National Institute of Technology, Calicut, India
4 shared publications- Prakhash Neelamegam
Department of Civil Engineering, School of Engineering, SR University, Warangal, 506371, Telangana, India
4 shared publications Sudha Das
Department of Civil Engineering, National Institute of Technology, Calicut, India
4 shared publications- Anila C. Shaju
Department of Civil Engineering, National Institute of Technology, Calicut, India
2 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Springer Nature in Scientific Reports
Data-integrated numerical modeling of Alkali–Aggregate reaction and mechanical degradation in concrete gravity dams
- 29 September 2026
- Published by Springer Nature in Scientific Reports
Open AccessData-integrated numerical modeling of Alkali–Aggregate reaction and mechanical degradation in concrete gravity dams
- Open Access
- 27 August 2026
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 20 (1) , 79
Multi-criteria Optimization of Sustainable High-strength LC3 Concrete Using an Integrated BWM-Taguchi Framework
- 27 August 2026
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 20 (1) , 79
Open AccessMulti-criteria Optimization of Sustainable High-strength LC3 Concrete Using an Integrated BWM-Taguchi Framework
- Open Access
- 14 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Explainable artificial intelligence for groundwater quality prediction and hydrochemical interpretation
Over the past decades, groundwater quality has declined significantly due to rapid urbanization, excessive fertilizer usage, and climate-driven hydrogeochemical changes. Accurate prediction and interpretation of groundwater quality therefore require advanced data-driven approaches integrated with domain knowledge. This study proposes an interpretable hybrid artificial intelligence framework for groundwater quality prediction and analysis using explainable artificial intelligence (XAI) and advanced machine learning algorithms. A total of 135 groundwater samples were collected from Tamil Nadu, India and analysed for 16 physicochemical parameters. The dataset was pre-processed through data cleaning, feature scaling, and outlier detection. Several machine learning models, including XGBoost, Random Forest, LightGBM, and CatBoost, were optimized using Optuna-based hyperparameter tuning and integrated through a stacked ensemble framework. The meta-learner achieved the best predictive performance (R2 = 0.938, RMSE = 0.237, MAE = 0.184). Water Quality Index analysis identified ammonia (NH₃), iron (Fe), and chromium (Cr) as dominant contaminants. Model interpretability using SHAP, LIME, and permutation importance revealed the buffering role of hydrochemical ions such as HCO₃⁻ and Ca2⁺, while spatial AI mapping indicated localized industrial contamination. The proposed framework improves predictive reliability while providing interpretable insights to support sustainable groundwater management.
- 14 July 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessExplainable artificial intelligence for groundwater quality prediction and hydrochemical interpretation
Over the past decades, groundwater quality has declined significantly due to rapid urbanization, excessive fertilizer usage, and climate-driven hydrogeochemical changes. Accurate prediction and interpretation of groundwater quality therefore require advanced data-driven approaches integrated with domain knowledge. This study proposes an interpretable hybrid artificial intelligence framework for groundwater quality prediction and analysis using explainable artificial intelligence (XAI) and advanced machine learning algorithms. A total of 135 groundwater samples were collected from Tamil Nadu, India and analysed for 16 physicochemical parameters. The dataset was pre-processed through data cleaning, feature scaling, and outlier detection. Several machine learning models, including XGBoost, Random Forest, LightGBM, and CatBoost, were optimized using Optuna-based hyperparameter tuning and integrated through a stacked ensemble framework. The meta-learner achieved the best predictive performance (R2 = 0.938, RMSE = 0.237, MAE = 0.184). Water Quality Index analysis identified ammonia (NH₃), iron (Fe), and chromium (Cr) as dominant contaminants. Model interpretability using SHAP, LIME, and permutation importance revealed the buffering role of hydrochemical ions such as HCO₃⁻ and Ca2⁺, while spatial AI mapping indicated localized industrial contamination. The proposed framework improves predictive reliability while providing interpretable insights to support sustainable groundwater management.
- Open Access
- 14 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Synergistic enhancement of strength and durability in self-healing concrete using treated pineapple fibres and bacterial mineralization
Conventional cement concrete is inherently brittle and susceptible to microcracking, which compromises durability and long-term performance. In order to remediate such conditions, the current research explores the integration of bacterial wollastonite and alkali-treated natural pineapple leaf Fibres (PALFs) to enhance mechanical, durability, and self-healing performance in cement concrete composite. A consortium of microbial system comprising ureolytic Bacillus sp. and non-ureolytic Bacillus cohnii was inoculated with an optimum 10% wollastonite mineral. Treated Fibres of varying dimensions (5, 10, 15 and 20 mm) and percentages (0.25, 0.5, 0.75 and 1%) were examined for their mechanical and durability properties. The inclusion of Fibres demonstrated the highest compressive strength improvement up to 26%, while the flexural and tensile features increased by 27.80% and 35%. Water absorption remained below 10%, with final absorption under 3%, confirming reduced porosity. Longer Fibres improved interlocking, minimizing abrasion loss (< 2.5 mm). Ultrasonic Pulse Velocity (UPV) exceeding 4.5 km/s and rebound number (> 40) classified the concrete as structurally dense and durable. The consistency of material integrity was substantiated by significant correlations observed between compressive strength, rebound number, and UPV. Comprehensive analyses through XRD and SEM-EDS validated extensive calcite deposition, indicating biomineralization that can contribute to autonomous crack-healing mechanisms, although self-healing efficiency was not directly quantified. These results demonstrate the viability of consortium-reinforced concrete incorporating wollastonite Fibres as a resilient and sustainability-oriented material, particularly for infrastructure applications where enhanced durability, extended service life, and reduced maintenance demands are critical.
- 14 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessSynergistic enhancement of strength and durability in self-healing concrete using treated pineapple fibres and bacterial mineralization
Conventional cement concrete is inherently brittle and susceptible to microcracking, which compromises durability and long-term performance. In order to remediate such conditions, the current research explores the integration of bacterial wollastonite and alkali-treated natural pineapple leaf Fibres (PALFs) to enhance mechanical, durability, and self-healing performance in cement concrete composite. A consortium of microbial system comprising ureolytic Bacillus sp. and non-ureolytic Bacillus cohnii was inoculated with an optimum 10% wollastonite mineral. Treated Fibres of varying dimensions (5, 10, 15 and 20 mm) and percentages (0.25, 0.5, 0.75 and 1%) were examined for their mechanical and durability properties. The inclusion of Fibres demonstrated the highest compressive strength improvement up to 26%, while the flexural and tensile features increased by 27.80% and 35%. Water absorption remained below 10%, with final absorption under 3%, confirming reduced porosity. Longer Fibres improved interlocking, minimizing abrasion loss (< 2.5 mm). Ultrasonic Pulse Velocity (UPV) exceeding 4.5 km/s and rebound number (> 40) classified the concrete as structurally dense and durable. The consistency of material integrity was substantiated by significant correlations observed between compressive strength, rebound number, and UPV. Comprehensive analyses through XRD and SEM-EDS validated extensive calcite deposition, indicating biomineralization that can contribute to autonomous crack-healing mechanisms, although self-healing efficiency was not directly quantified. These results demonstrate the viability of consortium-reinforced concrete incorporating wollastonite Fibres as a resilient and sustainability-oriented material, particularly for infrastructure applications where enhanced durability, extended service life, and reduced maintenance demands are critical.
- Open Access
- 14 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Hybrid data-driven assessment and optimization strategies for municipal solid waste generation
This study presents a comprehensive, harmonized dataset and an interpretable analytical framework for assessing per-capita waste generation (PCWG) across 36 Indian states and union territories. The research employs a robust data preprocessing methodology combined with a hybrid feature-selection approach, incorporating mutual information, tree-based importance metrics, and SHAP-based explainability, ensuring a transparent identification of key influencing factors. Supervised machine-learning models, including CatBoost and Random Forest, were trained to capture complex nonlinear relationships in municipal solid waste data, achieving high coefficients of determination (R2) of 0.952 and 0.802, respectively. Explainability analyses consistently highlight urbanization intensity and population density as critical drivers of PCWG variability. For scenario exploration, the predictive models are integrated with Bayesian optimization and NSGA-II-based multi-objective optimization to assess trade-offs between waste generation, treatment capacity, and implementation costs. The resulting Pareto-optimal solutions, along with annotated datasets, offer a valuable resource for comparative analysis, policy development, and urban sustainability studies. All data, workflows, and model outputs are designed to ensure reproducibility and transferability in diverse regional and environmental management contexts.
- 14 May 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessHybrid data-driven assessment and optimization strategies for municipal solid waste generation
This study presents a comprehensive, harmonized dataset and an interpretable analytical framework for assessing per-capita waste generation (PCWG) across 36 Indian states and union territories. The research employs a robust data preprocessing methodology combined with a hybrid feature-selection approach, incorporating mutual information, tree-based importance metrics, and SHAP-based explainability, ensuring a transparent identification of key influencing factors. Supervised machine-learning models, including CatBoost and Random Forest, were trained to capture complex nonlinear relationships in municipal solid waste data, achieving high coefficients of determination (R2) of 0.952 and 0.802, respectively. Explainability analyses consistently highlight urbanization intensity and population density as critical drivers of PCWG variability. For scenario exploration, the predictive models are integrated with Bayesian optimization and NSGA-II-based multi-objective optimization to assess trade-offs between waste generation, treatment capacity, and implementation costs. The resulting Pareto-optimal solutions, along with annotated datasets, offer a valuable resource for comparative analysis, policy development, and urban sustainability studies. All data, workflows, and model outputs are designed to ensure reproducibility and transferability in diverse regional and environmental management contexts.
- Open Access
- 27 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Optimization of carbonation parameters for recycled fine aggregate utilizing the Taguchi method and absorbent-assisted treatment
This study addresses the dual issues of natural sand depletion and the surge in construction and demolition waste by improving recycled fine aggregate (RFA) through optimised CO2 curing for use in both Portland pozzolanic cement (PPC) and one-part geopolymer mortars. Using the Taguchi L9 design, carbonation parameters—time, temperature, relative humidity, and CO2 concentration were statistically optimised to enhance process efficiency. The optimal condition of 24 h at 30 °C, 65% RH, and 15% CO2 markedly improved specific gravity and bulk density while lowering water absorption, confirming effective pore refinement in RFA. Silica gel and lime-assisted treatments further enhanced carbonation efficiency. The 3% silica gel-pre-soaked aggregate (CST2) achieved superior CO2 uptake and surface densification, while lime pre-treatment also produced notable improvements. The reported CO2 uptake values were quantitatively derived from thermogravimetric analysis by converting the mass loss associated with CaCO3 decomposition into equivalent CO2 content, enabling direct evaluation of carbonation efficiency. In PPC mortars, optimised RFA restored the strength loss typical of untreated aggregates, while in geopolymer mortars, CST2 and lime-treated RFA yielded up to 44% higher compressive strength, reflecting better binder–aggregate compatibility. Microstructural analyses (TGA, XRD, FTIR, SEM/EDS) confirmed the formation of a CaCO3 layer and an improved ITZ structure, while leachate tests indicated reduced pH and lower chromium release. Overall, the study offers a sustainable pathway for CO2 utilization and high-performance RFA production for durable, low-carbon cementitious systems.
- 27 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessOptimization of carbonation parameters for recycled fine aggregate utilizing the Taguchi method and absorbent-assisted treatment
This study addresses the dual issues of natural sand depletion and the surge in construction and demolition waste by improving recycled fine aggregate (RFA) through optimised CO2 curing for use in both Portland pozzolanic cement (PPC) and one-part geopolymer mortars. Using the Taguchi L9 design, carbonation parameters—time, temperature, relative humidity, and CO2 concentration were statistically optimised to enhance process efficiency. The optimal condition of 24 h at 30 °C, 65% RH, and 15% CO2 markedly improved specific gravity and bulk density while lowering water absorption, confirming effective pore refinement in RFA. Silica gel and lime-assisted treatments further enhanced carbonation efficiency. The 3% silica gel-pre-soaked aggregate (CST2) achieved superior CO2 uptake and surface densification, while lime pre-treatment also produced notable improvements. The reported CO2 uptake values were quantitatively derived from thermogravimetric analysis by converting the mass loss associated with CaCO3 decomposition into equivalent CO2 content, enabling direct evaluation of carbonation efficiency. In PPC mortars, optimised RFA restored the strength loss typical of untreated aggregates, while in geopolymer mortars, CST2 and lime-treated RFA yielded up to 44% higher compressive strength, reflecting better binder–aggregate compatibility. Microstructural analyses (TGA, XRD, FTIR, SEM/EDS) confirmed the formation of a CaCO3 layer and an improved ITZ structure, while leachate tests indicated reduced pH and lower chromium release. Overall, the study offers a sustainable pathway for CO2 utilization and high-performance RFA production for durable, low-carbon cementitious systems.
- Open Access
- 26 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Optimization of natural fibre length in bacterial cement mortar using TOPSIS for enhanced mechanical properties
The use of natural fibers has gained popularity as a sustainable substitute for synthetic fibers in various applications. This study investigates the optimization of natural fiber length in bacterial cement mortar to enhance its mechanical properties, with a focus on Banana and Kenaf fibers. Cement mortar samples were prepared with varying fiber lengths (0.5–3.5 cm) at a 2% fiber content by weight of cement, both with and without the inclusion of bacterial strains Bacillus cereus and Vibrio natriegens was in a ratio of 1:1.25 and the mechanical performance was evaluated through compressive, flexural, and split tensile strength tests. The Analytic Hierarchy Process (AHP) was employed to assign weights to each mechanical property, and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method was utilized to determine the optimal fiber length. The results showed that incorporating natural fibers significantly improved the mechanical properties of cement mortar, with the most significant enhancements observed in samples treated with bacteria. The optimal fiber length was determined to be 2.5 cm for both banana and Kenaf fibers with the addition of bacteria, yielding the highest strength values across all the mechanical tests. These findings demonstrate the synergistic benefits of combining natural fibers and bacterial treatment, offering a sustainable approach to improving the performance of cementitious materials for construction applications.
- 26 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessOptimization of natural fibre length in bacterial cement mortar using TOPSIS for enhanced mechanical properties
The use of natural fibers has gained popularity as a sustainable substitute for synthetic fibers in various applications. This study investigates the optimization of natural fiber length in bacterial cement mortar to enhance its mechanical properties, with a focus on Banana and Kenaf fibers. Cement mortar samples were prepared with varying fiber lengths (0.5–3.5 cm) at a 2% fiber content by weight of cement, both with and without the inclusion of bacterial strains Bacillus cereus and Vibrio natriegens was in a ratio of 1:1.25 and the mechanical performance was evaluated through compressive, flexural, and split tensile strength tests. The Analytic Hierarchy Process (AHP) was employed to assign weights to each mechanical property, and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method was utilized to determine the optimal fiber length. The results showed that incorporating natural fibers significantly improved the mechanical properties of cement mortar, with the most significant enhancements observed in samples treated with bacteria. The optimal fiber length was determined to be 2.5 cm for both banana and Kenaf fibers with the addition of bacteria, yielding the highest strength values across all the mechanical tests. These findings demonstrate the synergistic benefits of combining natural fibers and bacterial treatment, offering a sustainable approach to improving the performance of cementitious materials for construction applications.
- Open Access
- 27 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Performance evaluation of superplasticizers in one part geopolymer mortar
The widespread adoption of one-part geopolymer cement (OPGC) is constrained by its intrinsically low workability, which limits handling, casting, and field implementation. This study introduces a dry-mix technological strategy in which powdered superplasticizers (SPs) are directly pre-blended with the geopolymer binder, thereby eliminating on-site liquid admixture dosing and enhancing practical constructability. Powdered sulfonated naphthalene formaldehyde (SNF) and polycarboxylate ether (PCE) were incorporated at 0.5-2.5% by binder weight into an OPGC mortar composed of ground granulated blast furnace slag (GGBS), diatomite, and feldspar, activated using solid sodium hydroxide and anhydrous sodium silicate. Fresh performance, mechanical behavior, and in-situ quality indicators were evaluated through flowability, setting time, compressive, flexural, and split tensile strengths, ultrasonic pulse velocity, and rebound hammer testing. Chemical stability and microstructural evolution were examined via zeta potential, ATR-FTIR, XRD, SEM, and EDS analyses. The incorporation of 1% SNF yielded a 272.9% increase in relative slump and a 15.44% enhancement in 28-day compressive strength compared with the control, achieving a peak strength of 53.8 MPa. In contrast, PCE produced marginal workability gains (< 15%) and caused substantial strength reductions (up to 47%) to higher dosages. Spectroscopic and zeta potential analyses confirmed the chemical robustness of SNF under highly alkaline conditions, whereas PCE exhibited structural degradation and adverse dispersion behavior. Microstructural observations revealed denser and more homogeneous geopolymer gel matrix in SNF-modified systems. All SNF-based mortars exceeded 43 MPa at 28 days, matching the performance benchmark of 43-grade Ordinary Portland Cement while delivering an estimated 16-25% cost reduction. These findings demonstrate that the dry incorporation of SNF provides a scalable and industry-compatible pathway for producing high-performance, user-friendly one-part geopolymer binders, advancing their viability for practical construction applications.
- 27 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessPerformance evaluation of superplasticizers in one part geopolymer mortar
The widespread adoption of one-part geopolymer cement (OPGC) is constrained by its intrinsically low workability, which limits handling, casting, and field implementation. This study introduces a dry-mix technological strategy in which powdered superplasticizers (SPs) are directly pre-blended with the geopolymer binder, thereby eliminating on-site liquid admixture dosing and enhancing practical constructability. Powdered sulfonated naphthalene formaldehyde (SNF) and polycarboxylate ether (PCE) were incorporated at 0.5-2.5% by binder weight into an OPGC mortar composed of ground granulated blast furnace slag (GGBS), diatomite, and feldspar, activated using solid sodium hydroxide and anhydrous sodium silicate. Fresh performance, mechanical behavior, and in-situ quality indicators were evaluated through flowability, setting time, compressive, flexural, and split tensile strengths, ultrasonic pulse velocity, and rebound hammer testing. Chemical stability and microstructural evolution were examined via zeta potential, ATR-FTIR, XRD, SEM, and EDS analyses. The incorporation of 1% SNF yielded a 272.9% increase in relative slump and a 15.44% enhancement in 28-day compressive strength compared with the control, achieving a peak strength of 53.8 MPa. In contrast, PCE produced marginal workability gains (< 15%) and caused substantial strength reductions (up to 47%) to higher dosages. Spectroscopic and zeta potential analyses confirmed the chemical robustness of SNF under highly alkaline conditions, whereas PCE exhibited structural degradation and adverse dispersion behavior. Microstructural observations revealed denser and more homogeneous geopolymer gel matrix in SNF-modified systems. All SNF-based mortars exceeded 43 MPa at 28 days, matching the performance benchmark of 43-grade Ordinary Portland Cement while delivering an estimated 16-25% cost reduction. These findings demonstrate that the dry incorporation of SNF provides a scalable and industry-compatible pathway for producing high-performance, user-friendly one-part geopolymer binders, advancing their viability for practical construction applications.
- Open Access
- 24 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Investigation of carbonation-induced microstructural changes in low-cement concrete using sustainable binders: GGBS and calcium carbonate
Concrete manufacturing makes a major contribution to the world economy, especially the construction industry, but it has a high level of CO 2 emissions, which harm the environment. To address this environmental issue, this paper investigates the possibility of utilizing a natural mineral that consists of iron, silica, and magnesium, and that is referred to as calcium carbonate, to partially substitute cement. This has been neglected material in past studies, even though it can be used to boost the process of hydration, chemical stability, and even be low in solubility in water. The study is exploring the characteristics of calcium carbonate (CaCO 3 )-modified concrete, such as its physical, rheological, and microstructural properties. CaCO 3 and ground granulated blast furnace slag were taken as a replacement of 5%, 10%, 15% and 20% of the cement by weight, with a constant water to cement ratio being 0.45, and 50% replacement of cement by ground granulated blast furnace slag (GGBS). The plots of Nyquist and Bode that the microstructural analysis of the changes in the concrete matrix. Non-destructive testing was used to test the performance of the concrete in the long term, quality, homogeneity, and the hardness of the surface. The findings revealed that CaCO 3 -modified concrete was better than traditional concrete, especially in its resistance to carbonation. It gave the best result with 15% cement replacement, where compressive strength was 71.1 MPa, split tensile strength was 4.72 MPa, and flexural strength was 5.89 MPa after 90 days. The results indicate that CaCO 3 can be an effective alternative to cement that can be used in the production of concrete.
- 24 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessInvestigation of carbonation-induced microstructural changes in low-cement concrete using sustainable binders: GGBS and calcium carbonate
Concrete manufacturing makes a major contribution to the world economy, especially the construction industry, but it has a high level of CO 2 emissions, which harm the environment. To address this environmental issue, this paper investigates the possibility of utilizing a natural mineral that consists of iron, silica, and magnesium, and that is referred to as calcium carbonate, to partially substitute cement. This has been neglected material in past studies, even though it can be used to boost the process of hydration, chemical stability, and even be low in solubility in water. The study is exploring the characteristics of calcium carbonate (CaCO 3 )-modified concrete, such as its physical, rheological, and microstructural properties. CaCO 3 and ground granulated blast furnace slag were taken as a replacement of 5%, 10%, 15% and 20% of the cement by weight, with a constant water to cement ratio being 0.45, and 50% replacement of cement by ground granulated blast furnace slag (GGBS). The plots of Nyquist and Bode that the microstructural analysis of the changes in the concrete matrix. Non-destructive testing was used to test the performance of the concrete in the long term, quality, homogeneity, and the hardness of the surface. The findings revealed that CaCO 3 -modified concrete was better than traditional concrete, especially in its resistance to carbonation. It gave the best result with 15% cement replacement, where compressive strength was 71.1 MPa, split tensile strength was 4.72 MPa, and flexural strength was 5.89 MPa after 90 days. The results indicate that CaCO 3 can be an effective alternative to cement that can be used in the production of concrete.
- Open Access
- 21 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Performance evaluation and codal assessment of double-skinned solid-core CFST columns with varying steel configurations
This experimental study explores the behaviour of columns with double-skinned solid core concrete-filled steel tubular (DS-CFST) sections. Many experimental studies have been conducted on double-skinned hollow CFST sections so far, and this research has involved evaluating the performance of various configurations of steel tube geometry (square and circular combinations) of solid-core CFST specimens. Eight CFST short columns were subjected to axial compression, each measuring 410 mm in height (H). The study investigated the effects of various parameters, including concrete strength, steel area, width-to-thickness ratio, steel and concrete core percentage, and inner steel embedment position, on CFST short columns with slenderness ratios (λ) ranging from 9.4 to 10.9. The test results showed improvements in DS-CFST column axial compression, ductility, stiffness, failure modes, and structural behaviour due to adequate steel inner tube embedment. The CFSC specimens exhibited 6.64 times higher results than the steel tubes and 2.33 times greater strength than the CFST specimens, while other steel tube embedded specimens demonstrated significant strength improvements. The results are checked with the current codal provisions, ANSI/AISC-360, EC-4 and modelled by an artificial neural network (ANN).
- 21 March 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessPerformance evaluation and codal assessment of double-skinned solid-core CFST columns with varying steel configurations
This experimental study explores the behaviour of columns with double-skinned solid core concrete-filled steel tubular (DS-CFST) sections. Many experimental studies have been conducted on double-skinned hollow CFST sections so far, and this research has involved evaluating the performance of various configurations of steel tube geometry (square and circular combinations) of solid-core CFST specimens. Eight CFST short columns were subjected to axial compression, each measuring 410 mm in height (H). The study investigated the effects of various parameters, including concrete strength, steel area, width-to-thickness ratio, steel and concrete core percentage, and inner steel embedment position, on CFST short columns with slenderness ratios (λ) ranging from 9.4 to 10.9. The test results showed improvements in DS-CFST column axial compression, ductility, stiffness, failure modes, and structural behaviour due to adequate steel inner tube embedment. The CFSC specimens exhibited 6.64 times higher results than the steel tubes and 2.33 times greater strength than the CFST specimens, while other steel tube embedded specimens demonstrated significant strength improvements. The results are checked with the current codal provisions, ANSI/AISC-360, EC-4 and modelled by an artificial neural network (ANN).