A Scalable Compact Additively Manufactured Molten Salt to Supercritical Carbon Dioxide Heat Exchanger for Solar Thermal Application
- 23 August 2023
- journal article
- research article
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 146 (1) , 1-33
Abstract
Design of an additively manufactured molten salt (MS) to supercritical carbon dioxide (sCO2) primary heat exchanger (PHE) for solar thermal power generation is presented. The PHE is designed to handle temperatures up to 720 °C on the MS side and an internal pressure of 200 bar on the sCO2 side. In the core, MS flows through a three-dimensional periodic lattice network, while sCO2 flows within pin arrays. The design includes integrated sCO2 headers located within the MS flow, allowing for a counter flow design of the PHE. The sCO2 headers are configured to enable uniform flow distribution into each sCO2 plate while withstanding an internal pressure of 200 bar and minimizing obstruction to the flow of MS around it. The structural integrity of the design is verified on AM 316 stainless steel printed sub-scale specimens. An experimentally-validated, correlation-based sectional PHE core thermofluidic model is developed to study the impact of flow and geometrical parameters on the PHE performance, with varied parameters including the mass flow rate, surface roughness, and PHE dimensions. A process-based cost model is used to determine the impact of parameter variation on build cost. The model results show that a heat exchanger with a power density of 18.6 MW/m3 (including sCO2 header volume) and effectiveness of 0.88 can be achieved at a heat capacity rate ratio of 0.8. The impact of design and AM machine parameters on the cost of the PHE are assessed.Keywords
Funding Information
- Solar Energy Technologies Program (DE-EE0008536)
This publication has 24 references indexed in Scilit:
- Experimental thermohydraulic characterisation of flow boiling and condensation in additive manufactured plate-fin heat exchangerInternational Journal of Heat and Mass Transfer, 2022
- Binder jet additive manufacturing of ceramic heat exchangers for concentrating solar power applications with thermal energy storage in molten chloridesAdditive Manufacturing, 2022
- Experimental and numerical investigation of additively manufactured novel compact plate-fin heat exchangerInternational Journal of Heat and Mass Transfer, 2022
- Pressure drop and heat transfer characteristics of nitrate salt and supercritical CO2 in a diffusion-bonded heat exchangerInternational Journal of Heat and Mass Transfer, 2022
- Heat transfer performance of pillow plate heat exchanger with molten salt and supercritical carbon dioxideInternational Journal of Heat and Mass Transfer, 2022
- Heat transfer and friction of molten salt and supercritical CO2 flowing in an airfoil channel of a printed circuit heat exchangerInternational Journal of Heat and Mass Transfer, 2020
- Latest developments on TES and CSP technologies – Energy and environmental issues, applications and research trendsApplied Thermal Engineering, 2020
- Experimental study on the heat transfer performance of a molten-salt printed circuit heat exchanger with airfoil fins for concentrating solar powerInternational Journal of Heat and Mass Transfer, 2019
- An additively manufactured metallic manifold-microchannel heat exchanger for high temperature applicationsApplied Thermal Engineering, 2018
- Pitch and aspect ratio effects on single-phase heat transfer through microscale pin fin heat sinksInternational Journal of Heat and Mass Transfer, 2018