Abstract
The article proposes and demonstrates bandwidth (BW) enhancement techniques for wideband and widely programmable active filters operating with a fixed and a single supply voltage. Fully differential transconductors having voltage-biased nMOS transistors form the input differential pair with a pair of pMOS transistors forming the active load. The gyrators’ common-mode (CM) response is kept under 0 dB at low frequencies by CM feedback (CMFB) loops. A pair of ${\approx }300$ pH inductors and a capacitor, strategically shared among all transconductors, are used to sense and reject the high-frequency CM currents through the filter and provide CM stabilization at high frequencies. This extends the CM stability of the gyrators beyond the unity-gain bandwidth (UGB) of the CMFB loops. Another technique to relax the capacitance budget of the heavily loaded resistively terminated node of a leap-frog architecture is introduced. Background servo loops ensure automatic tracking and stabilization of the (trans) conductances across changes in ambient conditions. The efficacy of the proposed schemes is demonstrated through a singly terminated third-order Chebyshev low-pass filter implemented in a standard 65 nm bulk CMOS process operating with a fixed supply voltage of 1.1 V. The filter achieves a maximum −3 dB BW of 15.5 GHz, improving the state of the art by ${\gt } 1.5{\times }$ . The filter’s BW is tunable from 2.7 to 15.5 GHz while faithfully preserving its response shape. Its measured signal-to-noise ratio (SNR) varies between 38 and 44 dB while consuming 31–291 mW of power between its minimum and maximum BW settings, respectively. Furthermore, the filter can also be reconfigured as a bandpass, with tunable center frequencies between 2.5 and 13.4 GHz.
Funding Information
  • Ministry of Electronics and Information technology

This publication has 27 references indexed in Scilit: