Mayank Anupam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mayank Anupam has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Imon Mondal
Department of Electrical Engineering, IIT Kanpur, Kanpur, India
1 shared publication - Rajesh Mahanand Hegde
Department of Electrical Engineering, Indian Institute of Technology Kanpur, Kanpur, India
1 shared publication - Surender Redhu
Department of Electrical Engineering, Indian Institute of Technology Kanpur, India
1 shared publication
Latest Publications
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (7) , 3548-3563
A 2.7--15.5 GHz Programmable Bandwidth Continuous-Time Active Filter in 65 nm CMOS
The article proposes and demonstrates bandwidth (BW) enhancement techniques for wideband and widely programmable active filters operating with a fixed and a single supply voltage. Fully differential transconductors having voltage-biased nMOS transistors form the input differential pair with a pair of pMOS transistors forming the active load. The gyrators’ common-mode (CM) response is kept under 0 dB at low frequencies by CM feedback (CMFB) loops. A pair of ${\approx }300$ pH inductors and a capacitor, strategically shared among all transconductors, are used to sense and reject the high-frequency CM currents through the filter and provide CM stabilization at high frequencies. This extends the CM stability of the gyrators beyond the unity-gain bandwidth (UGB) of the CMFB loops. Another technique to relax the capacitance budget of the heavily loaded resistively terminated node of a leap-frog architecture is introduced. Background servo loops ensure automatic tracking and stabilization of the (trans) conductances across changes in ambient conditions. The efficacy of the proposed schemes is demonstrated through a singly terminated third-order Chebyshev low-pass filter implemented in a standard 65 nm bulk CMOS process operating with a fixed supply voltage of 1.1 V. The filter achieves a maximum −3 dB BW of 15.5 GHz, improving the state of the art by ${\gt } 1.5{\times }$ . The filter’s BW is tunable from 2.7 to 15.5 GHz while faithfully preserving its response shape. Its measured signal-to-noise ratio (SNR) varies between 38 and 44 dB while consuming 31–291 mW of power between its minimum and maximum BW settings, respectively. Furthermore, the filter can also be reconfigured as a bandpass, with tunable center frequencies between 2.5 and 13.4 GHz.
- 30 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (7) , 3548-3563
A 2.7--15.5 GHz Programmable Bandwidth Continuous-Time Active Filter in 65 nm CMOS
The article proposes and demonstrates bandwidth (BW) enhancement techniques for wideband and widely programmable active filters operating with a fixed and a single supply voltage. Fully differential transconductors having voltage-biased nMOS transistors form the input differential pair with a pair of pMOS transistors forming the active load. The gyrators’ common-mode (CM) response is kept under 0 dB at low frequencies by CM feedback (CMFB) loops. A pair of ${\approx }300$ pH inductors and a capacitor, strategically shared among all transconductors, are used to sense and reject the high-frequency CM currents through the filter and provide CM stabilization at high frequencies. This extends the CM stability of the gyrators beyond the unity-gain bandwidth (UGB) of the CMFB loops. Another technique to relax the capacitance budget of the heavily loaded resistively terminated node of a leap-frog architecture is introduced. Background servo loops ensure automatic tracking and stabilization of the (trans) conductances across changes in ambient conditions. The efficacy of the proposed schemes is demonstrated through a singly terminated third-order Chebyshev low-pass filter implemented in a standard 65 nm bulk CMOS process operating with a fixed supply voltage of 1.1 V. The filter achieves a maximum −3 dB BW of 15.5 GHz, improving the state of the art by ${\gt } 1.5{\times }$ . The filter’s BW is tunable from 2.7 to 15.5 GHz while faithfully preserving its response shape. Its measured signal-to-noise ratio (SNR) varies between 38 and 44 dB while consuming 31–291 mW of power between its minimum and maximum BW settings, respectively. Furthermore, the filter can also be reconfigured as a bandpass, with tunable center frequencies between 2.5 and 13.4 GHz.
- 22 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 68 (9) , 9178-9190
Optimal Relay Node Selection for Robust Data Forwarding Over Time-Varying IoT Networks
Mobility-tolerant data forwarding over time-varying IoT networks is a challenging problem. Selection of a relay node at every instant in time is crucial and calls for robust and distributed methods to improve the QoS in such networks. In this work, an optimal relay node selection method is proposed for robust data forwarding in time-varying networks. The proposed method selects a relay node based on joint optimization of two network parameters namely, data latency and link reliability. The Pareto front of this multi-objective optimisation problem is used to illustrate the tradeoff between low data latency and high link reliability. The proposed optimal relay node selection method first identifies all possible relay nodes at every time instant. The weights of the bi-objective problem are updated at every hop and an optimal relay node is selected among all the possible relay nodes, by solving the joint optimization problem. During performance evaluation, random spatial patterns of IoT devices are modelled using the homogeneous Poisson point processes. The connectivity duration information of all the IoT devices with their neighbours is updated continuously and a relay node found in an online manner. Simulation results indicate that the proposed method significantly improves data latency and the packet loss risk for data forwarding over time-varying IoT networks, when compared to conventional single parameter optimization methods. The proposed data forwarding method indicates additional gains in terms of transmission range, mobility tolerance, packet replication cost, and connectivity parameters of the time-varying IoT network.
- 22 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 68 (9) , 9178-9190
Optimal Relay Node Selection for Robust Data Forwarding Over Time-Varying IoT Networks
Mobility-tolerant data forwarding over time-varying IoT networks is a challenging problem. Selection of a relay node at every instant in time is crucial and calls for robust and distributed methods to improve the QoS in such networks. In this work, an optimal relay node selection method is proposed for robust data forwarding in time-varying networks. The proposed method selects a relay node based on joint optimization of two network parameters namely, data latency and link reliability. The Pareto front of this multi-objective optimisation problem is used to illustrate the tradeoff between low data latency and high link reliability. The proposed optimal relay node selection method first identifies all possible relay nodes at every time instant. The weights of the bi-objective problem are updated at every hop and an optimal relay node is selected among all the possible relay nodes, by solving the joint optimization problem. During performance evaluation, random spatial patterns of IoT devices are modelled using the homogeneous Poisson point processes. The connectivity duration information of all the IoT devices with their neighbours is updated continuously and a relay node found in an online manner. Simulation results indicate that the proposed method significantly improves data latency and the packet loss risk for data forwarding over time-varying IoT networks, when compared to conventional single parameter optimization methods. The proposed data forwarding method indicates additional gains in terms of transmission range, mobility tolerance, packet replication cost, and connectivity parameters of the time-varying IoT network.