An Experimental and Numerical Investigation into Compressor Casing Heat Shield Effectiveness
Open Access
- 2 February 2026
- journal article
- research article
- Published by MDPI AG in International Journal of Turbomachinery, Propulsion and Power
- Vol. 11 (1) , 9
Abstract
An investigation was conducted into the effectiveness of heat shields in an aero-engine compressor casing to slow down thermal time constants. The investigation used a combination of experimental measurements from a full-size compressor casing rig, combined with numerical analysis using CFD and thermal modelling. Experiments were performed on a compressor casing both with and without heat shielding in order to determine the heat shield effectiveness. Temperature measurements were taken throughout the casing in order to determine the thermal time constants. The experimental data was then used to validate a thermal model and CFD simulations of the compressor casing. The modelling allowed the heat transfer coefficients in the compressor casing to be determined from the experimentally measured time constants. It was found that the heat shields gave an increase in thermal time constant at each measured location. With a doubling in the time constant at some locations compared to the unshielded case. It was also found that the heat shields need to be fully sealed, as leakage flows significantly reduce their effectiveness.Keywords
Funding Information
- Aerospace Technology Institute UK
This publication has 7 references indexed in Scilit:
- Experimental measurement and characterisation of the effect of offtake flow on the time constants of a compressor casing2021
- Design of Heat Shield for Compressor Case of Industrial Gas Turbine to Meet Clearance Requirement2020
- Effects of Transient Heat Transfer on Compressor StabilityJournal of Turbomachinery, 2018
- Experimental and Numerical Investigation of Annular Casing Impingement Arrays for Faster Casing ResponseJournal of Engineering for Gas Turbines and Power, 2017
- Design and Development of a Full-Scale Generic Transient Heat Transfer Facility (THTF) for Air System Validation2015
- Gas Turbine Combustor Heat Shield Impingement Cooling Baffle2004
- Quantitative evaluation of transient heat transfer on axial flow compressor stability1985