A Soft-Switching Interleaved Buck–Boost LED Driver With Coupled Inductor
- 30 June 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (1) , 577-587
Abstract
In this article, a novel dc–dc light-emitting diode driver employing an interleaved converter is proposed and analyzed. The circuit topology mainly consists of two parallel buck–boost converters. A coupled inductor, which is composed of a magnetic core and two windings, is used to replace the energy storage inductors of the two buck–boost converters. This not only does not add any components, but also saves a magnetic core. The buck–boost converters are designed to operate near boundary conduction mode. Due to the characteristics of magnetic flux balance, the magnetic-excited current can be converted between the windings of the coupled inductor. By using the magnetic-excited current to release the charge stored in the parasitic capacitors of the active switches, these switches can fulfill zero-voltage switching on (ZVS) without the use of any auxiliary switches, active clamping circuits, or snubber circuits. Moreover, the freewheel diodes of both buck–boost converters can achieve zero-current switching off (ZCS). The steady-state analyses for different operation modes are provided, and the mathematical equations for designing circuit components are conducted. Finally, a 200-W prototype circuit was built and tested to verify the analytical predictions. According to the experimental results, all the semiconductor devices are operated at either ZVS or ZCS, and the circuit efficiency as high as 95.0% is measured. Satisfactory performance has verified the feasibility of the proposed converter.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 106-2221-E-214 -029)
This publication has 29 references indexed in Scilit:
- Investigation Into the Use of Single Inductor for Driving Multiple Series-Connected LED ChannelsIEEE Transactions on Power Electronics, 2016
- A CLCL Resonant DC/DC Converter for Two-Stage LED Driver SystemIEEE Transactions on Industrial Electronics, 2015
- Design and implementation of a novel interleaved flyback converter with leakage energy recycled2015
- Offline Soft-Switched LED Driver Based on an Integrated Bridgeless Boost–Asymmetrical Half-Bridge ConverterIEEE Transactions on Industry Applications, 2014
- High-Efficiency ZVS AC-DC LED Driver Using a Self-Driven Synchronous RectifierIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- Soft-Switching Bidirectional DC-DC Converter Using a Lossless Active SnubberIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- A isolated bidirectional interleaved flyback converter for battery backup system application2013
- Family of soft-switching resonant DC–DC convertersIET Power Electronics, 2009
- An Interleaved Boost Converter With Zero-Voltage TransitionIEEE Transactions on Power Electronics, 2009
- A novel high frequency current-driven synchronous rectifier applicable to most switching topologiesIEEE Transactions on Power Electronics, 2001