Inline rheological behavior of dispersed water in a polyester matrix with a twin screw extruder
- 3 May 2017
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 58 (5) , 775-783
Abstract
Solvent‐free extrusion emulsification (SFEE) is a complex process using twin‐screw extrusion to prepare solid‐liquid dispersions of high viscosity polymers and has received little study to date on its inherent mechanisms. To gain rheological insights into the earliest stage of SFEE as the interfacial boundary between water and polymer grows, prior to phase inversion, an inline orifice‐plate type viscometer is introduced to monitor transient behavior over a wide range of viscosities. The presented work examines rheological changes of a polyester‐water system produced by varying two factors thought to significantly control the final state of the dispersion, specifically polar group contributions to surface energy and viscosity. A processing modifier was combined with the polyester to study the influence of these two factors. The inline viscometer revealed an abrupt transition in viscosity occurred with the developed state of water dispersion, confirming observations of a prior batch study. Analysis of the rheological response indicated that a higher polar surface energy contribution had the greatest influence on the state of this transition, and that a steeper transition was related to greater incorporation of water within the polyester matrix. POLYM. ENG. SCI., 2017. © 2017 Society of Plastics EngineersKeywords
Funding Information
- Xerox Corporation
This publication has 18 references indexed in Scilit:
- Role of operating conditions in determining droplet size and viscosity of tackifier emulsions formed via phase inversionAIChE Journal, 2010
- The effect of formulation variables on the characteristics of insulin-loaded poly(lactic-co-glycolic acid) microspheres prepared by a single phase oil in oil solvent evaporation methodColloids and Surfaces B: Biointerfaces, 2009
- Effect of microfluidization parameters on the physical properties of PEG-PLGA nanoparticles prepared using high pressure microfluidizationJournal of Microencapsulation, 2009
- Effect of Plasticizers Content on the Mechanical Properties of Unsaturated Polyester ResinJournal of Thermoplastic Composite Materials, 2007
- Effects of viscosity ratio and composition on development of morphology in chaotic mixing of polymersPolymer, 2004
- Quantitative determination of the distribution of free hydroxylic and carboxylic groups in unsaturated polyester and alkyd resins by 31P‐NMR spectroscopyJournal of Applied Polymer Science, 2001
- Phase inversion studies in liquid‐liquid dispersionsThe Canadian Journal of Chemical Engineering, 1998
- Flow-induced phase inversion in the intensive processing of concentrated emulsionsChemical Engineering Science, 1998
- Calculation of interfacial tension in polymer systemsJournal of Polymer Science Part C: Polymer Symposia, 1971
- Viscosity Determination by Means of Orifices and Short TubesProceedings of the Physical Society of London, 1921