On-Wafer Monolithic Encapsulation by Surface Micromachining With Porous Polysilicon Shell
- 10 April 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 16 (2) , 462-472
Abstract
In this paper, we present a novel microfabrication technique that solves the main problems of existing monolithic on-chip encapsulation methods for polysilicon surface micromachining. The encapsulation technique includes the formation of a nanoporous polysilicon shell, creation of a cavity by removing the sacrificial layer through the pores in the shell, and sealing the cavity at a low pressure. Formed porous by postdeposition electrochemical etching on top of a sacrificial layer, the porous polysilicon is thick enough to free-stand when released, unlike the previously reported as-deposited permeable polysilicon. Benefiting from the dense pores through the polysilicon layer, the sacrificial material was removed in just one minute, and the vacuum sealing was achieved by a low-pressure chemical vapor deposition polysilicon as thin as 1000 Aring with no sealing material detected inside the cavity. The pressure inside the sealed cavity, measured by an encapsulated polysilicon Pirani gauge, was around 130 mTorr and showed no noticeable leak (<30 mTorr) over one year. To showcase the applicability, the proposed process was demonstrated through the common Multiuser MEMS Process (MUMPs) foundry serviceKeywords
This publication has 23 references indexed in Scilit:
- Permeable Polysilicon Etch-access Windows For Microshell Fabrication2005
- Stable thin film encapsulation of acceleration sensors using polycrystalline silicon as sacrificial and encapsulation layerSensors and Actuators A: Physical, 2004
- A Low-Temperature Thin-Film Electroplated Metal Vacuum PackageJournal of Microelectromechanical Systems, 2004
- Single wafer encapsulation of mems devicesIEEE Transactions on Advanced Packaging, 2003
- Microfabrication using one-step LPCVD porous polysilicon filmsJournal of Microelectromechanical Systems, 2003
- Mechanical integrity of polysilicon films exposed to hydrofluoric acid solutions2002
- SiO 2 thickness determination by x-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry, Rutherford backscattering, transmission electron microscopy, and ellipsometryJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2000
- Vacuum encapsulation of resonant devices using permeable polysilicon1999
- Vacuum sealing of microcavities using metal evaporationSensors and Actuators A: Physical, 1997
- Planar-processed tungsten and polysilicon vacuum microelectronic devices with integral cavity sealingJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1993