Experimental and statistical analysis of the block orientation effect on the mechanical behaviour of bimrocks
Open Access
- 10 December 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
The mechanical characterization of block-in-matrix rocks (bimrocks) remains a significant challenge in geotechnical engineering, primarily due to the difficulty of obtaining undisturbed specimens. While the Volumetric Block Proportion (VBP) is a recognized controlling factor, the specific role of block orientation is not well quantified. This study employs a systematic experimental approach, augmented by Response Surface Methodology (RSM) and Analysis of Variance (ANOVA), to investigate the effect of block orientation angle relative to loading direction (α) on the uniaxial compressive strength (UCS), deformation, and failure mechanisms of bimrock. A total of 87 synthetic specimens with VBP from 0% to 50% and α from 0° to 90° were tested. Statistical analyses confirm that both VBP and α, as well as their interaction, are statistically significant for both UCS and Elastic modulus. An increase in VBP reduces UCS, though this effect reduces with increasing α. Failure analysis reveals that higher VBP increases crack density, while an increase in α from 0˚ to 90˚ forces failure paths to become more tortuous. The Elastic modulus increases with VBP, with the most pronounced stiffening effect at α = 0° (vertical alignment). This effect diminishes with an increase in α and approaches that of the pure soil for α = 90°. In contrast, Poisson’s ratio showed no systematic trend, underscoring its sensitivity to local heterogeneity of Bimrock. This research conclusively demonstrates that block orientation is a critical, independent governing parameter. Consequently, predictive models must account for the interaction between block proportion and orientation to accurately simulate bimrock behaviour.Keywords
This publication has 52 references indexed in Scilit:
- An Integrated 3D DEM Modeling Process for Bimrocks Considering Post‐Peak Behavior and Block BreakageInternational Journal for Numerical and Analytical Methods in Geomechanics, 2025
- Coupled Hydro-Mechanical Behaviour of Rock Joints During Normal and Shear LoadingRock Mechanics and Rock Engineering, 2022
- The combined effect of fractures and mineral content on coal hydromechanical responseBulletin of Engineering Geology and the Environment, 2022
- Effects of block shape and inclination on the stability of melange bimrocksBulletin of Engineering Geology and the Environment, 2021
- Research on the effect of rock content and sample size on the strength behavior of soil-rock mixtureBulletin of Engineering Geology and the Environment, 2021
- Contribution of fractal dimension theory into the uniaxial compressive strength prediction of a volcanic welded bimrockBulletin of Engineering Geology and the Environment, 2020
- Evaluation of empirical approaches in estimating the deformation modulus of rock massesBulletin of Engineering Geology and the Environment, 2018
- Effect of Boundary Condition on the Shear Behaviour of Rock Joints in the Direct Shear TestRock Mechanics and Rock Engineering, 2017
- Petrogenesis of Metamorphic Rocks2011
- A Hypothesis on Modes of Failure of Rock Samples Tested in Uniaxial CompressionRock Mechanics and Rock Engineering, 2006