Development of a Boron Nitride-Filled Dental Adhesive System
Open Access
Abstract
There is a dearth of adhesive systems capable of forming stable bonds between restorative materials and tooth surfaces. To address the concern, this study determined the effects of using methacrylate-functionalized boron nitride nanosheets (BNNSs) in a polymeric dental adhesive system. The bisphenol A glycidyl dimethacrylate (BisGMA):2 hydroxyethyl methacrylate (HEMA) (60:40) adhesive monomer blend with a photoinitiator was filled with 0 wt% (control), 0.1 wt%, and 1 wt% BNNSs and light cured. Fourier transform infrared spectroscopy was performed to determine the conversion degree of monomer double bonds (DoC). Water absorption and solubility were measured. Flexural strength and Youngs’s modulus were evaluated to determine the mechanical properties of the composite adhesive system. Finally, dentin bond strength degradation and fracture mode were quantified with a microtensile bond test to confirm the bonding ability of the developed adhesive system. Results showed that the incorporation of BNNSs increased DoC (9.8% and 5.4% for 0.1 and 1 wt%, respectively), but it did not affect water sorption (101.9–119.72 (µg/mm3)), solubility (2.62–5.54 (µg/mm3)), Young’s modulus (529.1–1716.1 MPa), or microtensile bond strength (46.66–54.72 MPa). Further studies are needed with varying BNNS loading percentages from 0.1 wt% to 1 wt% in order to more comprehensively determine the effect of BNNSs on dental adhesives.Keywords
Funding Information
- NIH/NIDCR (1R56DE029457)
- University of Iowa—College of Dentistry internal seed research grant (1R56DE029457)
This publication has 59 references indexed in Scilit:
- Sorption and solubility characteristics of self-adhesive resin cementsDental Materials, 2012
- Poly(acrylic acid) grafted montmorillonite as novel fillers for dental adhesives: Synthesis, characterization and properties of the adhesiveDental Materials, 2012
- Lyotropic Hexagonal Columnar Liquid Crystals of Large Colloidal Gibbsite PlateletsLangmuir, 2010
- Large‐Scale Fabrication of Boron Nitride Nanosheets and Their Utilization in Polymeric Composites with Improved Thermal and Mechanical PropertiesAdvanced Materials, 2009
- Effect of porous glass–ceramic fillers on mechanical properties of light-cured dental resin compositesDental Materials, 2009
- Effect of an additional hydrophilic versus hydrophobic coat on the quality of dentinal sealing provided by two-step etchand-rinse adhesivesJournal of Applied Oral Science, 2009
- Gelation versus liquid crystal phase transitions in suspensions of plate-like particlesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006
- Hygroscopic and hydrolytic effects in dental polymer networksDental Materials, 2006
- Synthesis of low-shrinkage polymerizable methacrylate liquid-crystal monomersJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2005
- Letter: 'Composite filling materials as adhesives in orthodontics'British Dental Journal, 1975