High Strain Rate Compressive Behavior of Micro-Fibre Reinforced Fine Grained Cementitious Composite
- 20 June 2018
- journal article
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 276, 140-147
Abstract
This paper presents an experimental study on the high strain rate compressive behavior of micro-fibre reinforced ultrahigh performance cementitious composite, which is intended to be used as a matrix for slurry infiltrated fibre concrete (SIFCON). Cementitious composite specimens with 5 different types of microfibres, namely aramid, carbon, wollastonite, polypropylene and glass in amounts of 1.5-2.0% by volume were prepared and investigated. Split Hopkinson pressure bar (SHPB) equipment was used to determine the cementitious composite behavior at strain rates up to 1600 s-1. Quasistatic tests were performed, as well and ratios of these properties at high strain rates to their counterparts at static loading were compared. The dynamic increase factors were calculated. Strain rate sensitivity was observed - compressive strength was found to be increased with strain rate for all tested specimens. Peak stress values, critical compressive strain and post peak behaviour varies for specimens with different micro-fibre reinforcement, which allows to find the optimal reinforcement for high strain rate impacted structures.Keywords
This publication has 15 references indexed in Scilit:
- Blast impact behaviour of concrete with different fibre reinforcementEPJ Web of Conferences, 2015
- Blast resistance characteristics of concrete with different types of fibre reinforcementStructural Concrete, 2015
- Quasi-static and dynamic compressive mechanical properties of engineered cementitious composite incorporating ground granulated blast furnace slagMaterials & Design (1980-2015), 2013
- Dynamic compression behavior of ultra-high performance cement based compositesInternational Journal of Impact Engineering, 2010
- Stress–strain relationship of steel fiber-reinforced concrete under dynamic compressionConstruction and Building Materials, 2008
- Numerical investigation of concrete subjected to compressive impact loading. Part 1: A fundamental explanation for the apparent strength gain at high loading ratesComputers & Structures, 2008
- About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar testInternational Journal of Solids and Structures, 2003
- The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concreteCement and Concrete Research, 1999
- Slurry Infiltrated Fiber Concrete (SIFCON): Properties and ApplicationsMRS Proceedings, 1984
- The dynamic compression testing of solids by the method of the split Hopkinson pressure barJournal of the Mechanics and Physics of Solids, 1963