Microfluidic Study of Enhanced Oil Recovery during Flooding with Polyacrylamide Polymer Solutions
Open Access
- 28 May 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (6) , 1137
Abstract
A series of experiments have been carried out on the flooding of microfluidic chips simulating a homogeneous porous structure with various displacement fluids. Water and polyacrylamide polymer solutions were used as displacement fluids. Three different polyacrylamides with different properties are considered. The results of a microfluidic study of polymer flooding showed that the displacement efficiency increases significantly with increasing polymer concentration. Thus, when using a 0.1% polymer solution of polyacrylamide grade 2540, a 23% increase in the oil displacement efficiency was obtained compared to water. The study of the effect of various polymers on the efficiency of oil displacement showed that the maximum efficiency of oil displacement, other things being equal, can be achieved using polyacrylamide grade 2540, which has the highest charge density among those considered. Thus, when using polymer 2515 with a charge density of 10%, the oil displacement efficiency increased by 12.5% compared to water, while when using polymer 2540 with a charge density of 30%, the oil displacement efficiency increased by 23.6%.Keywords
Funding Information
- Ministry of Science and Higher Education of the Russian Federation (FSRZ-2020-0012)
This publication has 32 references indexed in Scilit:
- Fabrication and characterization of microcapsule encapsulating EOR surfactants by microfluidic techniqueColloids and Surfaces A: Physicochemical and Engineering Aspects, 2019
- Bioinspired Continuous and Spontaneous Antigravity Oil Collection and TransportationAdvanced Functional Materials, 2017
- An FTIR method for the analysis of crude and heavy fuel oil asphaltenes to assist in oil fingerprintingForensic Science International, 2016
- Determination of S, Ca, Fe, Ni and V in crude oil by energy dispersive X-ray fluorescence spectrometry using direct sampling on paper substrateFuel, 2015
- Status of Polymer-Flooding TechnologyJournal of Canadian Petroleum Technology, 2015
- Rheology of a New Sulfonic Associative Polymer in Porous Media2011
- EOR Screening Criteria Revisited— Part 1: Introduction to Screening Criteria and Enhanced Recovery Field ProjectsSPE Reservoir Engineering, 1997
- Commercial Test of Polymer Flooding in Daqing Oil Field Daqing petroleum Administrative Bureau1995
- Commercial polymer injection in the Courtenay Field1991
- Ueber die rechnerische Darstellung des Strukturgebietes der ViskositätColloid and Polymer Science, 1929