Effect of Punch Surface Microtexture on the Microextrudability of AA6063 Micro Backward Extrusion
Open Access
- 17 November 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (11) , 2001
Abstract
To apply conventional forming processes to microscale processing, the influence of size effects caused by material properties and friction effects must be considered. Herein, the effects of tool surface properties, such as punch surface texture, on microextrusion properties, such as extrusion force, product shape, and product microstructure, were investigated using AA6063 billets as test pieces. Millimeter-scale, microscale, and nanoscale textures were fabricated on the punch surfaces. Punch texturing was conducted by electrical discharge machining or polishing or using a laser process. The extrusion force increased rapidly as the stroke progressed for all punch textures. Comparing the product shapes, the smaller the texture size, the lower the adhesion and the longer the backward extrusion length. The results of material analysis using electron backscatter diffraction show that material flowability is improved, and more strain is uniformly applied when a nanoscale-textured punch is used. By contrast, when a mirror punch was used, material flowability decreased, and strain was applied non-uniformly. Therefore, by changing the surface properties of the punch, the tribology between the tool and material can be controlled, and formability can be improved.Keywords
This publication has 23 references indexed in Scilit:
- Micro-texture at the coated tool face for high performance cuttingInternational Journal of Machine Tools and Manufacture, 2011
- Study of size effect in micro-extrusion process of pure copperMaterials & Design (1980-2015), 2011
- Effect of specimen size and grain size on deformation in microextrusionJournal of Manufacturing Processes, 2011
- Influence of ultrasonic vibration on micro-extrusionUltrasonics, 2011
- Experimental and simulation study of deformation behavior in micro-compound extrusion processMaterials & Design (1980-2015), 2011
- Investigation of Deformation Size Effects During MicroextrusionJournal of Manufacturing Science and Engineering, 2006
- Study of the Size Effect on Friction Conditions in Microextrusion—Part I: Microextrusion Experiments and AnalysisJournal of Manufacturing Science and Engineering, 2006
- Microforming: Experimental Investigation of the Extrusion Process for Micropins and its Numerical Simulation Using RKEMJournal of Manufacturing Science and Engineering, 2004
- Process Characterization and Material Flow in Microforming at Elevated TemperaturesJournal of Manufacturing Processes, 2004
- Microforming—from basic research to its realizationJournal of Materials Processing Technology, 2002