Flexural and compressive behaviours of sustainable AC/RC composite system with various supplementary materials
Authors:
- 20 January 2021
- journal article
- research article
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (9) , 2922-2936
Abstract
Although sustainable infrastructure is indispensable, there is almost no reported research on an asphalt concrete (AC) and rubberized concrete (RC) composite pavement. Furthermore, each study incorporating rubber mostly deployed one or two supplementary materials. Therefore, the performance of sustainable AC/RC pavements with various supplementary materials including zeolite, slag, fly ash, and steel fiber was comprehensively investigated in this study. 126 cylinders (150×300 mm) and 84 beams (150×150×530 mm) under 4-point bending were tested. Based on the results, AC/RC pavement indicated much higher compressive strength, flexural strength, stiffness, and energy absorption capacity than AC one. Although 25% of coarse aggregate was replaced with rubber, when 30% of cement was replaced with zeolite, fly ash, and slag (each 10%) and steel fibers (1% of the beam volume) were added, 83.7% of the flexural strength of AC/plain concrete (PC) beams was retained. With 25% replacement of coarse aggregate by rubber and use of zeolite and slag (each 15%), 87.4% of the compressive strength of AC/PC was retained. 25% rubber and 30% slag were found to be the optimum design for AC/RC pavement. Moreover, results from the proposed equations for predicting flexural and compressive strengths were in good agreement with the test ones.Keywords
Funding Information
- Ministry of Science and Technology
- MOST (MOST 108-2218-E-009-036)
This publication has 49 references indexed in Scilit:
- Hydration of quaternary Portland cement blends containing blast-furnace slag, siliceous fly ash and limestone powderCement and Concrete Composites, 2015
- In-depth assessment of Crumb Rubber Concrete (CRC) prepared by water-soaking treatment method for rigid pavementsConstruction and Building Materials, 2014
- Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ashConstruction and Building Materials, 2013
- Effect on Mechanical Properties of Rubberized Concrete due to Pretreatment of Waste Tire Rubber with NaOHApplied Mechanics and Materials, 2013
- Cellular lightweight concrete containing high-calcium fly ash and natural zeoliteInternational Journal of Minerals, Metallurgy and Materials, 2013
- Behaviour of Slurry Infiltrated Fibre Concrete (SIFCON) under triaxial compressionCement and Concrete Research, 2010
- Pozzolanic activity of clinoptilolite: A comparative study with silica fume, fly ash and a non-zeolitic natural pozzolanCement and Concrete Research, 2010
- Mechanical properties of concrete containing a high volume of tire–rubber particlesWaste Management, 2008
- Fatigue behaviour of recycled tyre rubber-filled concrete and its implications in the design of rigid pavementsConstruction and Building Materials, 2007
- Effect of curing on the compressive strength, resistance to chloride-ion penetration and porosity of concretes incorporating slag, fly ash or silica fumeCement and Concrete Composites, 1995