Three-Dimensional Numerical Simulation for Annular Condensation in Rectangular Microchannels
Authors:
- 9 February 2009
- journal article
- research article
- Published by Taylor & Francis in Nanoscale and Microscale Thermophysical Engineering
- Vol. 13 (1) , 13-29
Abstract
A three-dimensional model in rectangular microchannels with constant heat flux is developed to predict steady annular condensation. The condensate flow field on the side wall, which is dominated by surface tension, is divided into two regions: the thin–film region and the meniscus region. The momentum and mass equations, in both the vapor and meniscus regions, along with the film thickness equation in thin–film region are solved numerically. The distribution of the meniscus curvature radius, thickness of the condensate film, heat transfer coefficient, and wall temperature are all determined. The results indicate that with the development of condensation, the condensate in the thin–film assumes a convex profile shape at the side wall, with the crest located at the midpoint of the side wall. The film thickness in the thin-film region increases at upstream locations and decreases as the flow moves downstream. The average heat transfer coefficient in the thin-film region is much larger than that occurring in the meniscus region. And the highest local heat transfer coefficient occurs at the intersection of the thin-film region and the meniscus on a cross section where the maximum wall temperature exists. The circumferential average heat transfer coefficient decreases drastically upstream to a lower value. After that, it remains nearly constant until close to the end of the annular flow, where it again begins to decrease.Keywords
This publication has 20 references indexed in Scilit:
- Condensation in MicrochannelsNanoscale and Microscale Thermophysical Engineering, 2008
- Review of Condensation Heat Transfer in Microgravity EnvironmentsJournal of Thermophysics and Heat Transfer, 2006
- Direct Comparison between Five Different Microchannels, Part 1: Channel Manufacture and MeasurementHeat Transfer Engineering, 2005
- Interface motion of capillary-driven flow in rectangular microchannelJournal of Colloid and Interface Science, 2004
- Experimental study of flow characteristics during condensation in narrow channels: the influence of the diameter channel on structure patternsSuperlattices and Microstructures, 2004
- Condensation Flow Mechanisms in Microchannels: Basis for Pressure Drop and Heat Transfer ModelsHeat Transfer Engineering, 2004
- Condensation on the outside surface of a small/mini diameter tube for vapor flowing through a horizontal annulus surround by an adiabatic concentric tubeInternational Journal of Heat and Mass Transfer, 2000
- Analytic modeling, optimization, and realization of cooling devices in silicon technologyIEEE Transactions on Components and Packaging Technologies, 2000
- Characterization of two-phase flow patterns in small diameter round and rectangular tubesInternational Journal of Heat and Mass Transfer, 1999
- Hautkondensation an feingewellten Oberflächen bei Berücksichtigung der OberflächenspannungenZeitschrift für angewandte Mathematik und Physik, 1954