Finite Control Set Model Predictive Control with Secondary Problem Formulation for Power Loss and Thermal Stress Reductions
- 30 April 2020
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1
Abstract
Thermal stress has been identified as one of the major failure causes in power modules. Generated from the power loss, thermal stress accelerates the degradation of semiconductor devices and downgrades the system reliability. This paper presents a finite control set model predictive control (FCS-MPC) oriented to reduce the power loss over the mission profile and relieve the thermal stress in power modules. Conventional control approaches including the switching frequency regulation, the reactive power injection and the DC bus voltage adaption show an effective progress. However, the increased control loops and complicated modulation schemes limit the system performance and practical implementation. In the proposed FCS-MPC, a secondary problem formulation is defined to reduce the power loss for the thermal stress reduction in power modules. It is simply integrated with the primary problem formulation in order to achieve the power flow control and power loss reduction simultaneously. An energy-based loss model is proposed for the loss prediction. The impact of the weightings between primary and secondary problem formulations is investigated and a most efficient weighting curve with a weighting-zones strategy is presented to design the proposed FCS-MPC. The proposed FCS-MPC is validated in the simulation studies and experiments. A 2.5-kW grid-tied inverter prototype is developed for the hardware testing and validation.Keywords
This publication has 29 references indexed in Scilit:
- A 3-D-Lumped Thermal Network Model for Long-Term Load Profiles Analysis in High-Power IGBT ModulesIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Thermal Loading and Lifetime Estimation for Power Device Considering Mission Profiles in Wind Power ConverterIEEE Transactions on Power Electronics, 2015
- Study and Handling Methods of Power IGBT Module Failures in Power Electronic Converter SystemsIEEE Transactions on Power Electronics, 2014
- Application of wide bandgap devices in renewable energy systems — Benefits and challenges2014
- Reactive Power Injection Strategies for Single-Phase Photovoltaic Systems Considering Grid RequirementsIEEE Transactions on Industry Applications, 2014
- Physics-of-Failure, Condition Monitoring, and Prognostics of Insulated Gate Bipolar Transistor Modules: A ReviewIEEE Transactions on Power Electronics, 2014
- Optimal Control of Traction Motor Drives Under Electrothermal ConstraintsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- Dynamic DC-link voltage adaptation for thermal management of traction drives2013
- Five years of operating experience at a large, utility‐scale photovoltaic generating plantProgress in Photovoltaics: Research and Applications, 2007
- Choosing a thermal model for electrothermal simulation of power semiconductor devicesIEEE Transactions on Power Electronics, 1999