Evaluation of the weld‐line strength of thermoplastics by compact tension test
Authors:
- 1 July 1997
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 37 (7) , 1217-1225
Abstract
In order to understand the relationship between processing conditions and the properties of weld‐lines on a molecular level, it is necessary to evaluate the true strength of the weld‐line that is not affected by the V‐shape notch on the surface of the weld‐line zone. In this experiment, the weld‐line strength of several brittle, ductile, or phase‐separated polymers was evaluated using the compact tension test by measuring the critical stress intensity factor, KIC, or the critical J‐value, JIC, and the results were compared with those obtained by tensile testing. For brittle polymers such as poly(methyl methacrylate) (PMMA) or styrene acrylonitrile copolymer (SAN), the value of the weld‐line factor, i.e., the strength ratio between the welded and the non‐welded specimen, is higher than that measured by tensile testing, because of the notch sensitivity of brittle thermoplastics and the notch dependence of tensile strength. On the other hand, in the case of ductile polymers such as polycarbonate (PC), the weld‐line factor is similar for both the tensile and compact tension tests. However, the dependency of the weld‐line factor on melt temperature is more obvious in the compact tension test. From these results, it seems that the compact tension test is more appropriate for measuring the interfacial adhesion strength across the weld‐line, which excludes the notch effect.Keywords
This publication has 14 references indexed in Scilit:
- Fracture toughness of weldlines in thermoplastic injection moldingPolymer Engineering & Science, 1993
- Buildup and relaxation of molecular orientation in injection molding. Part I: FormulationPolymer Engineering & Science, 1993
- The V‐notch at weld lines in polystyrene injection moldingsPolymer Engineering & Science, 1990
- Knit lines structure in injection molding of nylon 6: Relation to first solidified sample cross sectionPolymer Engineering & Science, 1989
- The relationship between processing conditions, morphological structure and mechanical properties of knit lines of an injection molded semi-crystalline thermoplasticMakromolekulare Chemie. Macromolecular Symposia, 1988
- Performance prediction of weldline structure in amorphous polymersPolymer Engineering & Science, 1986
- The influence of knit‐lines on the tensile properties of injection molded partsPolymer Engineering & Science, 1983
- Weld line structures and properties in injection molded polypropylenePolymer Engineering & Science, 1981
- The effects of processing parameters on the tensile properties of weld lines in injection molded thermoplasticsPolymer Engineering & Science, 1981
- THE USE OF KETAMINE HYDROCHLORIDE FOR ENDOTRACHEAL INTUBATION IN CATTLEAustralian Veterinary Journal, 1979