The Effect of the Thermal Mass of the Building Envelope on Summer Overheating of Dwellings in a Temperate Climate
Open Access
Abstract
The main objective of this paper is to demonstrate the effectiveness of increasing the thermal capacity of a residential building by using traditional building materials to reduce the risk of its excessive overheating during intense heat waves in a temperate climate. An additional objective is to show that the use of this single passive measure significantly reduces the risk of overheating in daytime rooms, but also, though to a much lesser extent, in bedrooms. Increasing the thermal mass of the room from light to a medium heavy reduced the average maximum daily temperature by during the first heat wave and by during the other two heat waves. The use of very heavy construction further reduced the average maximum temperature for the heat waves analyzed by , and , respectively, giving a total possible reduction in maximum daily temperatures in the range of °C, °C and °C. A discussion of the influence of occupant behavior on the use of night ventilation and external blinds was carried out, finding a significant effect on the effectiveness of the use of both methods. The results of the study suggest that in temperate European countries, preserving residential construction methods with heavy envelopes and partitions could significantly reduce the risk of overheating in residential buildings over the next few decades, without the need for night ventilation or external blinds, whose effectiveness is highly dependent on individual occupant behavior.
Keywords
This publication has 65 references indexed in Scilit:
- The increasing likelihood of temperatures above 30 to 40 °C in the United KingdomNature Communications, 2020
- Evaluation on Overheating Risk of a Typical Norwegian Residential Building under Future Extreme Weather ConditionsEnergies, 2020
- Drivers of the UK summer heatwave of 2018Weather, 2019
- Summer thermal comfort and overheating in the elderlyBuilding Services Engineering Research & Technology, 2019
- The impact of climate change on the overheating risk in dwellings—A Dutch case studyBuilding and Environment, 2017
- Monitoring summer indoor overheating in the London housing stockEnergy and Buildings, 2017
- Overheating investigation in UK social housing flats built to the Passivhaus standardBuilding and Environment, 2015
- Understanding and mitigating overheating and indoor PM 2.5 risks using coupled temperature and indoor air quality modelsBuilding Services Engineering Research & Technology, 2015
- National survey of summertime temperatures and overheating risk in English homesBuilding and Environment, 2013
- Dwelling temperatures and comfort during the August 2003 heat waveBuilding Services Engineering Research & Technology, 2005