Handling Stray Flux Signals for Stator Turn Insulation Degradation Monitoring
- 20 February 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 31 (6) , 3378-3385
Abstract
Considering that induction motors serve as prevalent drivers for industrial loads and recognizing that the deterioration of insulating material between stator turns can culminate in catastrophic failures, the periodic assessment of motor insulation emerges as an imperative task. Such vigilant oversight is indispensable for averting irreparable damage to the machinery and mitigating potential production losses. This study presents a sensor and methodology for practical deployment, detecting turn insulation deterioration. A noteworthy attribute of this method resides in its utilization of low-direct voltages to the machine winding as an alternative to the well-known offline Surge Test, thereby guaranteeing the preservation of insulation integrity. The development and fine-tuning of both the sensor and the diagnostic technique were underpinned by the application of Finite Element Analysis (FEA). Subsequently, the accuracy and reliability of the simulated results were compared to experimental tests. The method exhibits characteristics that render it suitable for industrial applications, including facile sensor positioning, the application of alternating voltage below nominal levels, a low signal acquisition rate, and the diagnostic standard being the Root Mean Square (RMS) value of the flux.Keywords
This publication has 26 references indexed in Scilit:
- Fracture failure analysis of insulation with initial crack defect for stator end-winding in induction motor by using magnetic-structural coupling modelEngineering Failure Analysis, 2023
- Induction motor short circuit diagnosis and interpretation under voltage unbalance and load variation conditionsExpert Systems with Applications, 2023
- Vibration Analysis of the Electric Drive System with Inter-turn Short-Circuit and Gear Spalling FaultsJournal of Vibration Engineering & Technologies, 2022
- Condition Monitoring and Fault Diagnosis of Induction MotorJournal of Vibration Engineering & Technologies, 2020
- Fault Diagnosis of Induction Motors2017
- Stator winding inter‐turn short‐circuit detection in induction motors by parameter identificationIET Electric Power Applications, 2017
- Evaluation of electrical insulation in three-phase induction motors and classification of failures using neural networksElectric Power Systems Research, 2016
- Incipient fault detection in induction machine stator-winding using a fuzzy-Bayesian change point detection approachApplied Soft Computing, 2011
- Optimal MLP neural network classifier for fault detection of three phase induction motorExpert Systems with Applications, 2010
- The detection of inter-turn short circuits in the stator windings of operating motorsIEEE Transactions on Industrial Electronics, 2000